Carbon shroud insert pair, MSX125 2021
€288.12
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7648
SKU: msx-10511 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopSet full race system under belly with long stainless silencer with carbon cap, Honda Monkey 125 2018-
€480.85
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Long
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. We recommend installing TYGA Performance product BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
See also set with the Carbon Side Cover Included : EXPS-0107
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0109) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0110 Stainless, Underbelly, with short silencer
EXPS-0107 Stainless, Underbelly with long Silencer and Carbon side Cover
EXPS-0108 Stainless, Underbelly with short Silencer and Carbon side Cover
Front Fork Preload Adjusters blue/red (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Red/Blue
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in red and blue anodised finish, (see TYLY-1097 and TYLY-2097 for other colour versions too) these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0097
SKU: MSX-10137 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsFuel Tank, GRP, VFR400R NC30, Painted Type 1
€1,381.75
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFG-0005type1
SKU: hon-11406 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30TYGA 300cc Bigbore Top End Rebuild Kit
€135.19
The kit includes all piston assy and gasket parts to rebuild one cylinder on your NSR300. For complete overhaul to both cylinders, please order two kits.
TYGA no: TPER-0016
SKU: hon-10826 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Screen clear RC30 style, Honda VFR400 NC30
€47.27
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: SCRE-0181
SKU: hon-11426 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Steering stopper, NSR250 MC21/MC28
€20.02
Steering stopper for race use. Reduces degree of movement in steering. Easy to attatch using hole for brake hose clamp on triple clamp.
TYGA no: TPER-0012
SKU: hon-10368 Categories: ALL products, Bodywork, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsTYGA bike dust cover LIME Green/Black “Ninja”
€70.19
TYGA Bike Dust Cover, Lime Green/Black, NINJA
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0131
SKU: kaw-10237 Categories: ALL products, Bike covers, ER6N-F 2009-11, Kawasaki, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, Shop, ZX10R 2011 -15, ZXR250C