Carbon undertray seat cowling VJ22 TYGA, Suzuki RGV250 VJ22
€126.36
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises of the parts below which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPCX-9026
SKU: suz-10225 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSet full race system under belly with short stainless silencer with carbon cap, Honda MSX125 GROM
€480.85
.Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Short
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( A db killer is included)
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0064 Stainless, Underbelly, with long silencer
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0068
SKU: MSX-10348 Categories: ALL products, Exhausts, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopCarbon frame/fairing (pair), NC35
€90.11
Carbon in fills pieces to replace the stock Honda plastic ones. Not suitable for Tyga RC211V style body kits.
Great carbon products, perfect fitment and give your bike that HRC factory look.
TYGA no: BPCC-0008
SKU: hon-10152 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopBracket, Right Footrest, Ninja 250R 2008 -12
€70.62
Bracket, Right Footrest, Ninja 250R 2008 -12
TYGA no: 35063-0386-18R
SKU: kaw-10211 Categories: ALL products, Kawasaki, Ninja 250R 2008- 12, ShopPillion seat cover “Black”, KTM RC390 2022 –
€122.50
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731black
SKU: ktm-10210 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsKit fairing set Race GRP, ninja 400
€962.68
Kit, Fairing Set (Race GRP) Kawasaki Ninja 400
This race fairing kit which is made using GRP (glass reinforced plastic) is primed and ready for paint** and has all bodywork components to transform a stock Ninja 400 into a race/trackday bike.
In case of a crash all panels are available separate, all fitting hardware included.
‘Note, due to the shape of the upper fairing, it is necessary to install lower than stock handlebars. We recommend TYGA Performance product TYLY-1212′
* A clear screen is provided unless you specify tinted in options dropdown below
** We recommend trial fitting and making minor adjustments before painting
TYGA no: BPFS-0175
SKU: kaw-10126 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-License plate holder (Tyga), Aprilia RS250
€51.57
This product holds the registration/license plate for use with our Aprilia RS-250 GP style seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using carbon, see BPCX-9130
TYGA no: BPFX-9130
SKU: apr-10073 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, Shop