Mirror Stay Rubber, MC28
€10.71
Mirror Stay Rubber, MC28
TYGA no: 88112-KV3-830
SKU: hon-11134 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Tyga Step Kit Replacement Bush, (Pair), 20mm
€12.44
This replacement part fits to the Tyga step kit on the KTM RC390 etc.
TYGA no: STHB-0020
SKU: ktm-10124 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR Forks to fit MC21/MC28
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3306
SKU: hon-11246 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Stock list, all modelsSide cover right Red, Honda MSX125 GROM
€39.31
Side cover right Valentine Red, OEM Honda part
TYGA no: 83530-K26-900ZB
SKU: MSX-10118 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopClamp/manifold, NSR150/250
€24.06
This is a replacement part for Tyga chambers. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXCS-0002
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMC-0001
SKU: hon-10379 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopStay, wire harness connector, Honda RS250R NXA
€4.64
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0322
SKU: hon-11384 Categories: ALL products, Honda, RS250R NF5 / NX5, RS250R NXA, Various partsAir duct GRP (pair), NC35
€131.81
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPFX-0018
SKU: hon-11417 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopExhaust stay right (tyga), Honda NSR250 MC21 – MC28
€59.59
Due to requests from customers with MC21 and MC28s wanting more support of the Tyga exhaust system when used withGP Race Tail kits, we now have this product designed to be retro fitted with our GP Race Tail kits:
BPFS-0003, BPFS-0004, BPFS-0005, BPFS-0006, BPFS-45, BPFS-0046, BPFS-0059 and BPFS-0060
The stay is provide with bushes, nuts and bolts to mount to the subframe. Note, you will need to drill the subframe TYY-0007 to install this stay and some adjustment of the seat cowling may be required.
Please note this product is ‘handed’ and you need one of each TYLY-0100L (Left) and TYLY-0100R (Right) for one bike.
TYGA no: TYLY-1100R
SKU: hon-10375 Categories: ALL products, Bodykit replacement parts, Bodywork, Exhausts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop