Under cowling (GRP) Black, Honda MSX125 GROM
€182.13
Under Cowl, (GRP), MSX125, painted asteroid black metallic to match your bike. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. We also offer the same product in Carbon, see BPCL-7028.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPFL-7028 B
SKU: MSX-10142 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopFrame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
€179.12
Frame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
This lightweight carbon cover fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: BPCC-9312R
SKU: hon-10718 Categories: ALL products, Bodykit replacement parts, Bodykit replacement partsCarbon rear seat, Aprilia RS250
€773.53
This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-1102.
This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe
TYGA no: BPCT-9030
SKU: apr-10071 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopVHM Cyl. Headset Honda CR125 ’05-’07
€291.95 €265.17
VHM Cyl. Headset Honda CR125 ’05-’07 (alg-10211) AA33083VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.20cc)Optional inserts:– blind– 11.00– 11.40– 11.60This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33083Â Â Â Â Â Â Â Â
SKU: alg-10211 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsTop triple clamp CNC black STREET, KTM RC390, 2014- 21
€486.77
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1831
SKU: ktm-10220 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsSeat Cowling, Undertray, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
€90.32
Seat Cowling, Undertray, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
This is a replacement part for set BPFS-0141. Please note that the following parts are required to complete the set:
BPFT-7331A Seat Cowling, Top
BPFT-7331B Undertray
BPSP-0007 Seat Pad
TYGA no: BPFT-7331B
SKU: ktm-10113 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Fairingstay stock, CBR250RR MC22
€85.34
Upper / Mirror Stay for MC22. Direct replica of the standard stay for simple replacement of bent, or old and ugly original item. Weight is comparable to standard item, but quality of welding is improved.
Step kit replacement right side mount assy, KTM RC125/200/390
€65.91
Tyga Step Kit Replacement Right Side Hanger Mount, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0048A
SKU: ktm-10090 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390