Water pump shaft/gear, Honda NSR250 MC28
€255.37
Water Pump Shaft/Gear, MC28
High quality hard anodized aluminium gear, on precision ground shaft.
Manufactured by T2 Racing in Japan.
Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.
The shaft and gear can be disassembled should any parts ever need replacing.
Note that this part is for MC28 only. For MC18 and MC21 please see TPER-5003
TYGA no: TPER-5004
SKU: hon-10623 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various partsCarbon fairing side stay pair, Suzuki RGV250 VJ21/22
€70.24
Fairing Side Stay, Carbon, Set, RGV250 VJ21/VJ22
These fairing stays are direct replacements for the Suzuki OE part number 94522-12C-00-000 on the VJ21 and VJ22 RGV250.
TYGA no: BPCC-0061
SKU: suz-10140 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsUpper Cowling Right (GRP), NC30/35, T13 Style , Assy.
€110.40
This a replacement part for bodywork sets BPFS-0115 and BPFS-0119
TYGA no: BPFU-9218R
SKU: hon-10814 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, By model, Honda, RVF400RR NC35TYGA 300cc Bigbore Top End Rebuild Kit
€135.19
The kit includes all piston assy and gasket parts to rebuild one cylinder on your NSR300. For complete overhaul to both cylinders, please order two kits.
TYGA no: TPER-0016
SKU: hon-10826 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Seal, Clutch Outer/case, MC28SP
€35.94
Seal, Clutch Outer/case, MC28SP
TYGA no: 91204-KV3-841
SKU: hon-11112 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Exhaustset stainless steel alum. silencer round, Honda CBR125
€346.39
This full race system has been specifically designed for the CBR125 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0013Â
SKU: hon-10278 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopCarbon silencer guard (street) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0048
SKU: ktm-10153 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsBodykit complete MiniRacerXtreme, Honda MSX125SF GROM
€1,637.22
Bodywork Set, (GRP), MRX, MSX125SF Second Generation Grom
This kit is the ultimate modification for your MSX125SF Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.
With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125SF Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.
This body kit MUST be used with a high level exhaust because there is no space for the belly type in the fairing lower. We recommend the following exhaust systems:
EXPS-0065
EXPS-0066
EXPS-0067
Comes with a free MRX Bike Dust Cover
Note this kit is specific to the MSX125SF second generation Grom. For the first generation kit, please order BPFS-0127 and BPFS-0128
TYGA no: BPFS-0155
SKU: MSX-10391 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MRX, MSX125 GROM, MSX125SF 2016 -2020