Nut, 6mm, L/H thread, MC28
€2.28
Nut, 6mm, L/H thread, MC28
TYGA no: 90310-634-980
SKU: hon-11129 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Rubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsGear 2nd drive z=16 no.2, RGV250/RS250
€92.10
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Fuel Tank, carbon, HONDA VFR750R RC30
€1,362.72
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Boyesen Dual reeds, Yamaha RD350 LC YPVS
€86.78 €82.79
Boyesen Dual reeds, Yamaha RD350
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.
1 engine = 1 set
TYGA no: boyesen1
SKU: alg-10374 Categories: ALL products, High performance, RD350LC 4L0, Shop, YamahaCarbon tank protector, Honda RVF400
€104.89
This real carbon protector is designed to fit snuggly on the NC35 fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCC-0015
SKU: hon-10363 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopBelly Pan, (GRP) RD250/350LC (4LO)
€181.29
Belly Pan, (GRP) RD250/350LC (4LO)
This belly pan faithfully compliments the classic lines of the legendary ‘Elsie’ along similar lines to the ones used back in the day, complete with the obligatory air scoops on either side. Although the design is traditional, the construction is modern and we have taken advantage of modern materials and techniques to bring you a better product than others on the market.
The belly pan itself is made from high strength epoxy resin and 200 gram glass fabric, making it flexible and light and attractive both on the inside and out. The mounting brackets are laser cut for precision and better aesthetics and they are covered by a plastic coating to give them a firm but kind grip on the frame rails. There is a great deal of adjustability built into the design and to allow our customers to mount this part in exactly the position they desire, based on other modifications such as exhausts, we supply it undrilled.
This product is supplied primed, however, will require minor preparation, before it’s ready for paint.
This product is suitable for stock and our exhaust system, EXCS-0044 which we offer for the RD350LC (4L0)
As well as this GRP (Glass reinforced plastic) version, we also supply a carbon version, BPCL-7032
Front fender,Suzuki RGV 250
€71.75
Front fender,Suzuki RGV 250 (suz-10008)
This is apart made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
TYGA no: BPFF-9008
SKU: suz-10008 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki