Top Triple Clamp, CNC black, VTR1000 SP1
€239.09
CNC machined top triple clamp with detachable ignition switch/lock holder for your Honda SP1. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-1058(p)
SKU: hon-10934 Categories: ALL products, CNC parts, Honda, Shop, VTR1000Sp1SP2Tail light LED RC211V
€59.92
This tail light is wired to fit the stock NC30/35 wiring harness for tail light and brake light functions. It also has bullet connectors for connecting to the registration/license plate holder light. It is very light and is held in place by two sided adhesive tape. To be used on our RC211V and T13 style seat cowlings but could be adapted to fit any other model which has a near vertical surface to apply it to.
TYGA no: BPLT-0013
SKU: alg-10068 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Carbon frame/fairing (pair), NC30
€176.58
Carbon frame in-fill panels for NC30. Replace the nasty plastic original ones with thes elegant carbon ones.
TYGA no: BPCC-7417
SKU: hon-10160 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Water Hose C, MC28
€12.31
Water Hose C, MC28
TYGA no: 19513-KV3-770
SKU: hon-11161 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Triple clamp set CNC black, Honda NSR250 MC21 CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21
CNC machined TYGA lower triple clamp for the MC21 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1841
SKU: hon-10556 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopSet pipe “slip on’ Mesh slash cut” stainless, KTM Duke 390
€168.73
Set, Pipe, Slip On, Mesh, Slash Cut, KTM 390 Duke
Hand welded from stainless steel, this is a direct bolt on to the standard 390 Duke . Just remove the stock silencer and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).
Set windscreen molding and clips,
€25.91
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: BPAC-0015
SKU: hon-11324 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Honda, Mito 125, Monster, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC36-2 -> RC30 replica products, RG125, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, ZXR250C, ZXR400LCarbon clutch cover, Honda MSX125 Grom 1st + 2nd gen.
€87.04
Clutch Cover, (Carbon), MSX125 Grom. Carbon direct replacement for original plastic part. Reinforced on inside with carbon/Kevlar for abrasion resistance. Protects your engine and looks cool!
TYGA no: BPCC-7528
SKU: MSX-10074 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop