Seat cowling left VJ21, Suzuki RGV250 VJ21
€39.40
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021H and R. for installation.
TYGA no: BPFT-9021L
SKU: suz-10102 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Handle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsBolt, Clutch Spring, MC28R
€1.46
Bolt, Clutch Spring, MC28R
TYGA no: 93404-06022-00
SKU: hon-11100 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Set full race system high level with stainless silencer with carbon cap, Honda MSX125SF GROM
€490.49
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Stainless Oval/Carbon End Cap. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0067
SKU: MSX-10338 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopHandlebar MiniRacerXtreme, Honda MSX125 GROM
€3.09
Handlebar, MiniRacerXtreme, MSX125 Grom
TYGA no: TYLY-1105HB
SKU: MSX-10254 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopCarbon side covers (pair), Yamaha RD350LC (4LO/4L1)
€313.19
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: BPCC-7032
SKU: yam-10083 Categories: 2 stroke exhaust sets, ALL products, Exhausts, RD350LC 4L0, Shop, YamahaCarbon rear hugger, KTM Duke 125/200/390
€110.40
This rear hugger replaces the nasty plastic item, adds class to your ride and is an easy installation.
Update your bike with these beautiful carbon products, same shape as original. Fits in minutes.
TYGA no: BPCH-7031Â
SKU: ktm-10004 Categories: ALL products, Carbon, Duke 125/200 2012- 16, Duke 390 2012-16, KTM, ShopDecal, Fuel Tank, Kawasaki, Silver, Ninja 250R 2008 -12
€3.00
Decal, Fuel Tank, Kawasaki, Silver, Ninja 250R 2008 -12
TYGA no: 56054-0054
SKU: kaw-10193 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, Shop