Carbon Front fender, Aprilia RS250
€195.96
This is a stock shaped fender complete with mounting holes pre drilled for ease of fitment.
Fits both Aprilia RS250 models, but styled from the MK2 RS250.
Weighs a fraction of the stock one at approx. 250g
Update your bike with this great carbon product, direct replacement of the original part.
TYGA no: BPCF-9007
SKU: apr-10021 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopSection, Final, Front, Twin Stack, Stainless, NC30/35
€101.51
Final tailpipe section (front bank) for:
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXPT-9002
SKU: hon-10853 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsSeat set street RC211V, NC35 kit
€749.18
This set of bodywork is designed to replace the NC35 stock seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0029 (street, carbon)
BPFS-0030 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0035
SKU: hon-10136 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopFront sprocket 14T, Honda MSX125 GROM
€7.37
14T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.
TYGA no: JTA-H-WA-420-F-14T
SKU: MSX-10085 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Sprockets, SprocketsBrake Lever, MC28
€118.57
Brake Lever, MC28
TYGA no: 46500-KV3-830
SKU: hon-11145 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Triple clamp set CNC black, Honda CBR250 MC22 -> RVF400 fork
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1231
SKU: hon-11231 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersFront fender (GRP), HRC NSR250 replica
€75.27
Front Fender, GRP, HRC NSR250 replica
Front Fender, Factory HRC NSR250 Racer Style. This front fender is designed to fit HRC factory NSR250 forks but could possibly made to fit other models with suitable mounting hardware. It is similar in styling to the front fenders used by factory riders such as Cadalora, Biaggi, Ukawa, Okada etc. in the years 1992-1995. The reason for this fender being in our line up is we were lucky enough to source some factory forks and needed a fender to go with them and wanted something as close the original as possible and designed it from photos and memory so while similar, it is not an exact replica. In any case if you look at the fenders used by HRC at that time, you can see that there are slight differences between years and bikes.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc.
TYGA no: BPFF-0007
SKU: hon-10942 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSeat set race, Suzuki RGV 250
€602.27
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown in the picture which are also available separately.
It is supplied with all additional fasteners required to mount it to a stock VJ22.
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0037
SKU: suz-10013 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki