Fuel hose clip, RC36-2 RC30 style
€8.22
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSY-0347
SKU: hon-11450 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSet full race system high level with maggot silencer, Honda MSX125SF GROM
€409.54
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Moto Maggot. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043). Similar power would be expected with the Maggot system EXPS-0065
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/q4RjGB7doOM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0065
SKU: MSX-10340 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopSeat set street RC211V, NC30
€637.59
This set of bodywork is designed to replace the stock NC30 seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0027 (street carbon)
BPFS-0028 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0034
SKU: hon-10068 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Screen clear stock shape, Suzuki RGV 250 VJ23
€52.00
Screen clear stock shape, Suzuki RGV 250 VJ23
TYGA no: SCRE-0064
SKU: suz-10133 Categories: ALL products, CNC parts, Honda, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250Seat set RVF (With taillight holes), NC35
€242.59
Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please not for this product with no taillight holes, please order BPFT-9104.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
TYGA no: BPFT-9004
SKU: hon-10140 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopSet pipe Full race system WSS300, KTM RC390 2022-
€1,180.91
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0160
SKU: ktm-10196 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon Rear hugger, Aprilia RSV125 2012-
€186.77
Rear Hugger (Carbon), 2012-2014 Aprilia RSV 125
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Set, 4 pieces Headlight adjustment springs
€1.82
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: exsg-0005
SKU: hon-11524 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various parts