VHM piston (14mm piston pin) RS125 NF4 1987-’94 – RS250 NF5 1987-’92
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521717
SKU: alg-10401 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsTriple clamp CNC black set, KTM RC125/RC200/RC390
€253.69
Top Triple Clamp Set, CNC Black, KTM RC Series
CNC machined top triple clamp with detachable ignition switch/lock holder for your KTM RC Series motorcycle
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition lock holder is positioned to allow use of the steering lock, but can be removed for race use.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: TYLY-1073
SKU: ktm-10072 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, ShopSilencer aluminium premium SHORTY 60mm 2 stroke stainless endcap
€113.23
This shorty (55mm shorter than our other 2 stroke silencers) aluminium two stroke silencer offers the same excellent value for money that our silencers always have but now with improved build quality and precision
– CNC machined mounting end cap with 3 holes precision drilled for mounting to exhaust chamber flange
– stainless steel exit end cap and nozzle
– cartridge glass wool insulation for greater longevity
– lightweight: weighs just 0.6 kg
– tough anodised body finish for enhanced looks and weather resistance
– Silencer is designed with a built-in sealing ‘O’ ring and stainless steel bolts and washers are provided.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0067
SKU: alg-10257 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopCarbon front fender, Yamaha R6 2006-12
€220.20
carbon front fender,
Direct replacement for original Yamaha fender.
Let your bike stand out from the crowd.
TYGA no: BPCF-7009
SKU: yam-10018 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Brakereservoir cap, nissin
€58.86
This anodised CNC machined reservoir cap replaces the stock Nissin cap (Pt #45513-KV3-006, used on many models). We provide a range of colours as well as this colour.
Suitable for most Honda sports bikes that have a remote mounted reservoir for the front brake master and have a two bolt mounting arrangement. (Not suitable for threaded type caps.)
This product will fit:
NSR250 MC18, MC21, MC28
CBR400RR NC23, NC29
VFR400R NC30
CBR900RR SC28
VFR750 RC30
etc
May be suitable for other makes too.
TYGA no: TYLY-1049 - TYLY-4049
SKU: alg-10060 - alg-10064 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, NSR250 MC18, NSR250 MC21, NSR250 MC28, VFR400RR NC30Triple Clamp Set, CNC Silver, NC35 Forks to fit MC28
€588.29
CNC machined TYGA triple clamp set for the MC28 to take NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0741
SKU: hon-10786 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35O- ring for TYGA silencer 2 stroke
€4.33
O- ring for TYGA silencer 2 stroke
TYGA no: EXOR-000
SKU: alg-10116 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Yamaha, YZ250 2005-15Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ21
€310.41
Bare replacement left side chamber for EXCS-0031L