Water Hose, NSR250 MC21/28
€11.08
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 19512-KV3-700
SKU: hon-11242 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsHRC sticker 110mm (type 3)
€5.54
This product is a genuine OEM Honda HRC sticker. Very high quality. Excellent inks and printing with strong adhesive so no need to clearcoat over. Size is approx. 110 mm. X 40 mm.
TYGA no: 87124-KPP-940ZA
SKU: alg-10071 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Hawk/Bros 400/650, Honda, Merchandise, MSX125 2021-, MSX125 GROM, MSX125SF 2016 -2020, New OEM Honda parts, NR750, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RC36-2 -> RC30 replica products, RS250R NF5 / NX5, RVF400RR NC35, RVF750 RC45, Shop, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2Set pipe Stainless full race system “round carbon silencer”, Kawasaki ZXR400L
€962.68
Set, Pipe, Stainless, Full Race System, Round Carbon Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long carbon round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0140 for similar system.
Carbon chain guard, KTM RC125/RC200/RC390 2022-
€141.35
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7131B
SKU: ktm-10207 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsFront fender (GRP), HRC NSR250 replica
€75.27
Front Fender, GRP, HRC NSR250 replica
Front Fender, Factory HRC NSR250 Racer Style. This front fender is designed to fit HRC factory NSR250 forks but could possibly made to fit other models with suitable mounting hardware. It is similar in styling to the front fenders used by factory riders such as Cadalora, Biaggi, Ukawa, Okada etc. in the years 1992-1995. The reason for this fender being in our line up is we were lucky enough to source some factory forks and needed a fender to go with them and wanted something as close the original as possible and designed it from photos and memory so while similar, it is not an exact replica. In any case if you look at the fenders used by HRC at that time, you can see that there are slight differences between years and bikes.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc.
TYGA no: BPFF-0007
SKU: hon-10942 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSection final stainless exhaust, Honda MSX125 GROM 1st gen.
€64.13
Section, Final, Stainless, MSX125 Grom, suitable for our single high level systems EXPS-0041, EXPS-0042, EXPS-0052 and EXPS-0065.
For EXPS-0066 and EXPS-0067, please see EXPT-0065
TYGA no: EXPT-0037
SKU: MSX-10140 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopAir Duct, Carbon, Stock Shape, RGV250 VJ23
€130.09
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Handle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all models