Seal, Waterpump, MC21/28
€4.05
Seal, Waterpump, MC21/28
TYGA no: 10x20x5
SKU: hon-11082 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ22
€281.46
Bare replacement right side chamber for EXCS-0009R
Front fender stock type , NSR250 MC18/21/28
€66.24
Stock shape made in lightweight strong epoxy resin fibreglass.
TYGA no: BPFF-0009
SKU: hon-10411 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopPod filter (pair), Suzuki RGV250 VJ21/VJ22
€95.73
Pod Filter, Pair, RGV250 VJ21/VJ22
High air flow pod filters, specifically designed for the RGV250 VJ21/22.
In house designed and 3D printed flexible manifolds are swept at 10° for frame and fuel tank clearance, and also feature locking tabs to ensure a snug and secure fit onto the RGV carburetor bellmouth.
Uses high quality Japanese air filter foam for maximum airflow, while providing protection from dust and debris entering the engine.
Please use the standard manifold clamps to secure to the carb.
**As with any performance upgrade, please ensure that you check and reset the carb settings accordingly to avoid engine damage.**
TYGA no: TPER-0100
SKU: sux-10148 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsCarbon belly pan race cup style, KTM RC390
€321.01
Belly Pan, Race, (Carbon), Cup Style, KTM RC390
This lightweight belly pan is modeled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is finished in a UV resistant clear coat so no additional painting is necessary.
This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock foot pegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.
This product can be fitted to a street bike as well as cup racing bikes.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCL-7231
SKU: ktm-10035 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 390, ShopSet, Pipe, Full Race System, Ninja 250 2008-12, Moto Maggot Silencer
€491.32
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot silencer EXSL-4013
Independent Review:
TYGA Ninja 250R Race Exhaust System Dyno Results
October 29th, 2010 Adam
2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock Exhaust
I’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!
Ninja 250R Dyno results are for the following runs:
Black: Stock Exhaust (no modifications whatsoever)
Blue: Stock Exhaust (snorkel removed)
Red: TYGA Round Aluminum Race System (snorkel removed)
Note: Carbs were not jetted. Fuel mixture screws were not adjusted.
HP Gains:
1) Remove snorkel ( 1.5HP) == 28.1HP!
2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!
Total: 5.7HP ( 4.2HP from TYGA exhaust!)
Weight Comparison (lbs):
Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbs
TYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbs
TYGA no: EXPS-0032
SKU: kaw-10086 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12Silencer mesh/slash cut, slip on with carbon cover, Yamaha R25/R3
€209.75
Set, Pipe, Slip On, Mesh, Slash Cut, Yamaha R25/R3
Hand welded from stainless steel, this is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhaust cover and fit the TYGA silencer and exhaust cover.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.
TYGA no: EXPS-0071
SKU: yam-10058 Categories: ALL products, Exhausts, Stock list, all models, Yamaha, YZF-R25/R3set exhaust pipe stainless steel no silencer
€492.45
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, No Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome! Note this system does not include any silencer (muffler). Please see olur other exhausts EXPS-00072, EXPS-0073 and EXPS-0074 for complete systems including silencer.
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072 EXPS-0073 and EXPS-0074 for similar system.
Performance and Dynograph
Please refer to dynographs for TYGA fulls ystem with silencer installed
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0075
SKU: yam-10062 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3