Set full race system under belly with short stainless silencer + carbon side cover, Honda Monkey 125 2018-
€731.40
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Short, with Carbon Side Cover
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted stainless silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. This set includes Carbon Side Cover BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0107) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0107 Stainless, Underbelly, with long silencer
Decal set, type 9 astroid black scheme, Honda MSX125 GROM
€53.08
Decal Set, MSX125, Type 9, 2015 Asteroid Black Metallic Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026X
SKU: MSX-10317 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSeat cowling (GRP) race cup style, KTM RC125/RC200/RC390
€213.32
eat Cowling, Race, (GRP), Cup Style, KTM RC390
This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. We also modified the mounting points to make it easier to install. Mounting points are reinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.
This product is supplied with all mounting hardware.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 125, 200 and 390 RC models and is for race use only.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPFT-7131
SKU: ktm-10031 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopFront spacer wheel kit, fork conversion CBR600RR 05-06.
€36.64
Wheel, Front, Spacer Kit. ’05-’06 CBR600RR fork conversion.
These spacers are designed to allow the standard NSR250, NC30/35 front wheel to be used together with the ’05-’06 model CBR600RR forks when used with our CBR600RR triple clamp conversion.
Note that the upper/lower triple clamp bore dimensions are 48mm – 53mm.
The standard ’05-’06 axle shaft is too large a diameter to fit the NSR/NC wheel, so these spacer bushes are used to allow the use of the smaller axle shaft. The standard NSR250/NC30 shaft is a little too short, so we recommend using an RVF400 axle.
The NSR/NC disc mounting face is 100mm wide. The disc pitch, centerline to centerline of the rotors should be 138mm, and the discs 310mm in diameter.
RVF750R RC45 or NR750 discs can be used
TYGA no: TPER-0065
SKU: hon-10962 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsSet pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, ShopExhaust Gasket, Spring, NSR150/250
€66.78
Exhaust Gasket, Spring, NSR150/250
TYGA no: 18293-KV3-004
SKU: hon-11163 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Tuning set CNC silver GROM
€62.96
Tuning set CNC silver GROM (msx-10158)
A set contains:
2x clutch – brake mount clamp
1x Brake reservoir cap
1x Clutch adjuster
TYGA no: special012
SKU: MSX-10158 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsExhaust set slip on, oval stainless silencer with carbon cap, Honda MSX125 GROM
€394.13
Set, Pipe, Slip On, MSX125 2013-14, Stainless Oval/Carbon End Cap
Made in stainless steel with spring mounted hairline finish stainless silencer, and precision made CNC machined end cap. This system significantly saves weight and gives the best bang for the buck! This systme is supplied with a decibel killer which significantly reduces noise without adversely affecting performance and with installed, this is currently our quietest exhaust system available for the MSX125. ideal for owners not wishing to disturb the neighbours! (May not comply with noise regulations for some states and territories)
This system is supplied with a stainless steel sleeve silencer EXSL-1142
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range. Note, this test was done without the decibel killer installed.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0051
SKU: MSX-10278 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, Shop