Rear sprocket aluminium gold, ZXR400 / ER6
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0112-42T - TYSR-0112-47T
SKU: kaw-10049 - kaw-10054 Categories: ALL products, By product, ER6N-F 2009-11, Kawasaki, Sprockets, ZXR400LDecal, Side Fairing, Ninja Black, Ninja 250R 2008 -12
€6.02
Decal, Side Fairing, Ninja Black, Ninja 250R 2008 -12
TYGA no: 56054-0059
SKU: kaw-10228 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 RVF400
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3312
SKU: hon-11265 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsExhaust Chamber, Right, Stainless Steel, MC28
€317.17
This is the bare right side replacement chamber for EXCS-0005B suitable for EXCS-0005B and EXCS-0006B for the MC28
Tube fuel strainer, VFR750 RC36-2 OEM part
€14.46
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: 16956-MT4-000
SKU: hon-11460 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, StocklistKit, Bodywork, GRP, stock shape, NSR250 MC21, Painted Rothmans
€1,604.24
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Please note this product is only available for delivery in 7 days
TYGA no: BPFS-0205
SKU: hon-11280 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersVHM piston (15mm piston pin) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521708 + size
SKU: alg-10400 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsSet exhausts side by side stainless steel, Suzuki RGV 250 VJ21
€731.40
TYGA performance makes the only aftermarket exhaust set for the Suzuki RGV250 VJ21.Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system. By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value and performance. New! Tyga Performance RGV250 exhausts are now supplied with a double ‘O’ ring manifold for superior sealing. In addition, the ‘O’ rings are made from Viton which are resistant to automotive fluids and better able to withstand higher temperatures.
This product EXCS-0031 is made from stainless steel and has one chamber exiting left and one chamber exiting on the right.
Parts included with this product:1 x left side chamber, side by side (left exiting) stainless steel1 x right side chamber, side by side (right exiting) stainless steel2 x silencer single clamps and mounting bolts, washers and nuts2 x manifolds4 x manifold ‘O’ rings2 x mounting flanges4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/LmQAQqP9_AQ frameborder= 0 allowfullscreen></iframe>
TYGA no: EXCS-0031
SKU: suz-10087 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, RGV250 VJ21, Shop, Suzuki