Set pipe “slip on’ Mesh slash cut” stainless, KTM Duke 390
€168.73
Set, Pipe, Slip On, Mesh, Slash Cut, KTM 390 Duke
Hand welded from stainless steel, this is a direct bolt on to the standard 390 Duke . Just remove the stock silencer and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).
Lower Cowling, GRP, NC30, Stock Shape, Painted Type 1
€441.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFL-0003Btype1
SKU: hon-11410 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30fairing set race RC211V, NC30 kit
€807.58
Fairing set race RC211V, NC30 kit
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0012
SKU: hon-10064 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Silencer clamp double 60mm (double bolt)
€34.12
This GP silencer clamp is specifically designed TYGA GP style expansion chambers for the Suzuki RGV250 and Aprilia RS250.
Designed to securely clamp 60~61mm O.D. silencers, and then mounts the silencers rigidly to the original mounting bracket.
Also for use with TYGA Suzuki RGV250 bodywork.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0006
EXCS-0008
EXCS-0010
EXCS-0011
EXCS-0018
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0012
SKU: alg-10022 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, RGV250 VJ22, RS250, ShopCarbon stay set lower cowl, Honda CBR250RR MC22
€71.28
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0237
SKU: hon-11467 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSet pipe full race system WSS300 (no silencer), KTM RC390
€680.90
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0159
SKU: ktm-10197 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSet exhausts side by side stainless steel, Aprilia RS250
€702.49
This is what you need for your Aprilia RS250, stainless cone welded rings, this exhaust has performance and looks even better!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
New! Tyga Performance Aprilia exhausts are now supplied with a double ‘O’ ring manifold for superior sealing. In addition, the ‘O’ rings are made from Viton which are resistant to automotive fluids and better able to withstand higher temperatures.
By using stainless steel for longevity and beauty, TYGA systems offer ubeatable value and are available in two configurations.
Please select the system that suits your requirements:
Side by side (left and right exiting) stainless steel chambers, EXCS-0007
GP (conventional twin right exiting) stainless steel chambers, EXCS-0008
We recommend a change of main jet from #270/#280 to #280/290 for fitment with stock bikes.
This product EXCS-0007 is made from stainless steel and has one chamber exiting left and one chamber exiting on the right.
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
4 x manifold ‘O’ rings
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/LmQAQqP9_AQ frameborder= 0 allowfullscreen></iframe>
TYGA no: EXCS-0007
SKU: apr-10026 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS250, Shop Tags: aprilia rs250 suzuki RGV250., Cone welded racing pipesTank cover, CBR125/CBR150/CBR250 2011 – CBR300 2014
€107.43
This lightweight and attractive real carbon cover will make your bike stand out from the crowd and fits in minutes.
TYGA no: BPCX-7108
SKU: hon-10168 Categories: ALL products, Carbon, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR300R 2014-, Honda, Shop, Various parts, Various parts