2T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsIgnition Switch Holder, CNC Silver, NC35 RVF400
€121.39
Ignition Switch Holder, CNC Silver, NC35 RVF400
This is a removable ignition switch/lock holder for our Honda NC35 RVF400 top triple clamps. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-0042, TYLY-0242 and TYLY-0742.
TYGA no: TYLY-0142
SKU: hon-10782 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35Carbon lower cowling, Aprilia RS250 Tyga, assy
€632.02
This lower cowling is suitable for our Aprilia RS-250 kits, BPFS-0100 and BPFS-1100.
This product is compatible with upper cowling BPFU-9030, BPFU-9130 and BPCU-9030. Will not fit stock Aprilia upper cowling
TYGA no: BPCL-9030
SKU: apr-10069 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopTank filler cap racing , Kawasaki type 2
€69.87
ank Filler Cap, Keyless, Racing Type, Kawasaki Type 2
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most Kawasaki sportsbike models around the years 2003-2006. See list below for list of models.
Suitable for the following models:
- ZX-14 (2006-2008)
- ZZR1200 (2002-2005)
- ZRX1200R (2001-2005)
- Z750 (2003-2007)
- Z1000 (2003-2006)
- ZX-10R (2004-2005)
- ZX-9R (2000-2003)
- ZX-6RR (2003-2006)
- ZX-6R (2000-2006)
- ZX-6RR 636 (2003-2006)
- ZZR600 (2005-2007)
- 650R/ER-6 (2006-2007)
- ZX1100 (1995 & up)
See also TYLY-0114 and TYLY-0116 for other Kawasaki types.
Fuel hose clip, RC36-2 RC30 style
€8.22
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSY-0347
SKU: hon-11450 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistBar end weight (pair), Honda CBR250RR MC22
€21.46
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0322
SKU: hon-11468 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSet full race system high level with carbon silencer with carbon cap, Honda MSX125SF GROM
€519.40
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Carbon Oval/Carbon End Cap. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2100 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0066
SKU: MSX-10339 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopCarbon heel guard left, VJ22/ NC30/NC35
€46.68
Replacement carbon heel guard for your TYGA Step Kit. Mounting hole pitch of 50mm may allow use on other machines.
TYGA no: BPCC-9003
SKU: alg-10045 Categories: ALL products, By model, Carbon, Hawk/Bros 400/650, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30