Bracket rear brake CNC black 84mm Brembo, Honda NSR250 MC28
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Black, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc brake to get the correct clearance.
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-1089)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1089Â
SKU: hon-10430 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, ShopTurn signal Set Rear black, Honda RC30 style
€90.08
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPLT-0039
SKU: hon-11542 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistAxle slider kit (black) Kawasaki Ninja 400
€56.33
Axle slider kit (black) Kawasaki Ninja 400
TYGA no: TPER-0057
SKU: kaw-10156 Categories: ALL products, Kawasaki, Ninja 400R 2018-, Shop, Various partsCarburettor Seal/Gasket Kit, MC21
€69.55
Carburettor Seal/Gasket Kit, MC21
Carburettor Seal/Gasket Kit, MC18, MC21
MC18/MC21 Carburettor Seal/Gasket kit.
1 Kit is for 1 Carburettor, so 2 kits needed for 1 bike
TYGA no: 16010-KM9-505
SKU: hon-11170 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21Carbon fuel tank, Honda NSR250 MC28
€1,444.49
Fuel Tank, Carbon, NSR250, MC28
Top quality reproduction of the steel MC28 fuel tank in carbon fiber. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:
BPFS-0003
BPFS-0004
BPFS-0032
BPFS-0059
BPFS-0060
BPFS-0129
BPFS-0130
BPFS-0131
TYGA no: BPCG-0001
SKU: hon-10682 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopTyga Step Kit Replacement Brake Link, CBR250R/CBR300R
€18.78
Tyga Step Kit Replacement Brake Link, CBR250R/CBR300R
This replacement part fits to the Tyga step kit brake lever on the CBR250R/CBR300R adjustable step kit etc.
Exhaust section, stainless steel, Honda MSX125 GROM
€103.66
Section to be used with Moto Maggot EXSL-8013 as part of system EXPS-0034
TYGA no: EXPT-0034
SKU: MSX-10003 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, ShopFootpeg replacement short, universal Tyga
€34.69
Replacement foot peg for your TYGA Step Kit, short type. Complete with M8x55 taper socket bolt for mounting and 3x 8mm washers. Ideal for racing for better clearance when fully leant over.
We recommend securing with thread locking agent to resist vibration.
Note compare to similar product STAP-0001 which is the same except 93 mm. instead of 78 mm. in length
TYGA no: STAP-0003
SKU: alg-10133 Categories: ALL products, Aprilia, CBR250R 2011 - 15, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Kawasaki, KTM, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RS250R NF5 / NX5, RVF400RR NC35, Shop, Suzuki, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-R25/R3