Section header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsHeadlight unit, Honda MSX125 GROM
€67.83
Headlight Unit Complete
TYGA no: 33110-K26-901
SKU: MSX-10006 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop, Universal partsSection, Header, Rear Right, Stainless, NC30/35
€135.29
Header, Rear Right. Used on:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXPT-3002
SKU: hon-10848 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsEngine spacers, RGV250 VJ21/VJ22 Aprilia RS250
€36.14
Engine Spacers RGV250 VJ21/VJ22
These lightweight 6061-T6 aluminium spacers are anodized for corrosion resistance and beauty and replace the steel and often corroded stock Suzuki ones. They are direct replacements for the Suzuki OE part number 09180-10123 (09180-10151) and 09180-10126 (09180-10145) on the VJ21 and VJ22 RGV250.
TYGA no: TPER-0075
SKU: suz-10136 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various parts, Various parts, Various partsVHM blind insert, Honda NSR250
€52.95
VHM blind insert, Honda NSR250 (alg-10097)VHM Blind Insert for the NSR250Machine your own profile for special fuels or applications.All necessary O-ring grooves are pre-machined.Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AE32069-A
SKU: alg-10097 Categories: ALL products, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, VHM productsMain step holder right, Honda MSX125 GROM
€72.27
Main step holder right OEM Honda part
TYGA no: 50600-K26-900
SKU: MSX-10027 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon engine cover set, Honda CBR1000 2008 -15
€157.26
These lightweight carbon covers fit over the engine case and has kevlar reinforcing, designed to protect your engine against scratches and damage in the event of an accident.
TYGA no: BPCC-8101
SKU: hon-10447 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopSilencer mesh/slash cut, slip on with carbon cover, Yamaha R25/R3
€209.75
Set, Pipe, Slip On, Mesh, Slash Cut, Yamaha R25/R3
Hand welded from stainless steel, this is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhaust cover and fit the TYGA silencer and exhaust cover.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.
TYGA no: EXPS-0071
SKU: yam-10058 Categories: ALL products, Exhausts, Stock list, all models, Yamaha, YZF-R25/R3