Tank filler cap “racing”, Honda type 4
€69.87
Tank Filler Cap, Keyless, Racing Type, Honda
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and and mounting hardware, it can be installed in minutes. This product is suitable for nearly all Honda sportsbike models since the 1990s which have the usual 7 allen bolt mounting arrangement (3 which actually mount to the tank and the other 4 dummy ones for the outer ring)
Suitable for the following models:
- CBR 600 F4I F4 F3 F2 (1991-2008)
- CBR 600RR (2003-2011)
- CBR 900 (1995-1999)
- CBR 929 (all years)
- CBR 954 (all years)
- RC51 (all years)
- VTR 1000 (all years)
- CBR1000RR (all years)
- CBR 1100 1100XX (all years)
- CB 600F (07-10)
- CB1000R (08-11)
- CB 900F 919 Hornet 900 (all years)
- CBR 250RR (All Years)
- CBR 400RR (All Years)
- RVF 400 (All Years)
- VFR 400 (All Years)
TYGA no: TYLY-1222
SKU: hon-11441 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Hawk/Bros 400/650, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC36-2 -> RC30 replica products, RVF400RR NC35, Shop, Tank fillers, Various parts, Various parts, various parts, Various parts, various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VTR1000Sp1SP2Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
€196.92
Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
CNC designed and manufactured in house. Facilitates mounting holes for securing the ignition switch holder assy TYLY-1144
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Seat cowling stock race , Suzuki RGV 250
€252.35
Seat Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This seat cowling is modelled from the original stock VJ22 shape and is suitable for all race classes but particularly those where the you need to keep the stock silhouette. It is a full-on race version with the seat area covered over for maximum rider feedback when on the limit.
Note that this panel is designed to make it possible to remove the fuel tank while the seat cowling stays installed. The panel is top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
Only available as race version, no street version with light provision.
TYGA no: BPFT-9226
SKU: suz-10094 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiHandlebar set 50 mm, black
€230.31
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 50mm. inverted front suspension. See application chart below.
7 degree angle for a comfortable, yet sporty feel.
Ducati 750/900SS
Ducati Monster, Pre 2010
Honda CBR1000RR 2004
Honda CBR929/954
Honda RC45
Honda RC51 2000-05
Honda RS250 NF5/NX5 USD
Honda RVF400 NC35
Kawasaki ZX10R 2004
Kawasaki ZX14R All
Kawasaki ZX6/RR/636 2003
Suzuki GSXR1000 2001
Suzuki GSXR1100 95-98
Suzuki GSXR1300 All
Suzuki GSXR600 2004
Suzuki GSXR600 92-93
Suzuki GSXR600 94-96
Suzuki GSXR750 1993
Suzuki RGV250 VJ22/23
Suzuki TL1000R
Suzuki TL1000S
Yamaha R1 1998
Yamaha R6 2005
Yamaha YZF750 94-97
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-1078
SKU: alg-10089 Categories: ALL products, Aprilia, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, Shop, Suzuki, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, ZX10R 2011 -15Carbon swingarm covers, Honda CBR1000 2008 – 11
€235.94
These lightweight carbon covers fit over the stock swing arm and it is designed to protect against scratches and damage to your swing arm in the event of an accident. The right side also incorporates a ‘sharkfin’ compulsory in some classes of racing.
TYGA no: BPCC-8001
SKU: hon-10448 Categories: ALL products, Bodywork, CBR1000 2008-11, CBR1000 2012-, Honda, ShopCarbon swing arm shark fin guard
€56.52
Universal , Swing Arm, Carbon Shark Fin Guard
This tough carbon shark fin is designed to fit on the bottom of most swing arms and is supplied with mounting hardware. Depending on the design, the swing arm itself can be drilled and tapped (for cast type) or if box section, then drilled through and the rivet nuts supplied in the kit can then be installed to make for a professional and trouble free installation.
TYGA no: BPCX-0005
SKU: alg-10276 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Dax and Chaly, Desmosedici RR, Ducati, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, KSR110 2005- 10, KTM, Mito 125, Monster, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, RVF750 RC45, Sprockets, Suzuki, Suzuki RGV250, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250C, ZXR400LRacing step kit CNC silver, Honda CBR900 SC28
€362.52
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium. Uses carbon heel guards on both sides.
This step kit moves the peg position back 10 mm. and up 25 mm. from standard. Pitch of hanger to frame mounting holes is 79 mm.
TYGA no: STAA-0020
SKU: hon-10364 Categories: ALL products, CBR900RR 1992- 95, CNC parts, Honda, ShopSeat cowling GRP, Honda NSR250 MC28
€348.13
Seat Cowling, (GRP), MC28 GP-T
We now make four versions of our NSR250 GP Race seat cowling for use for the MC28 in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0133 (GRP,Street)
BPFS-0134 (GRP Race)
BPFS-0135 (Carbon,Street)
BPFS-0136 (Carbon, Race)
The advantages of this seat cowling over stock include:
– use with rest of seat cowlign kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9033, BPFX-9333, BPCX-9033 and BPCX-9333 Undertray, NSR250 GP-T
TYLY-0108 Subframe, NSR250 GP-T
BPFX-9233 Seat Support, NSR250 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFT-9133
SKU: hon-10465 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250 MC28, Shop