Set exhausts side by side stainless steel, Honda NSR250 MC28
€769.95
THE exhaust set for your Honda NSR250 MC28, cone welded for that HRC factory look!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencers clamping hardware which mounts directly to the stock MC28 silencer stays for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.
Please note this product fits MC28 only. For MC21, please select EXCS-0005A
This product, EXCS-0005B, has one chamber exiting left and one chamber exiting on the right.
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
TYGA no: EXCS-0005b
SKU: hon-10306 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC28, ShopUpper cowling set GRP endurance , Honda VFR400 NC30
€434.45
Upper Cowling Set, Endurance, (GRP) NC30
This Suzuka 8 Hour inspired cowling is supplied with four headlight covers, two unpainted ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC30 headlight and mounts to the bike using the mounting hardware provided (Upper stay and front mounting bolt and spacer bush. All the other parts mount the same way as stock including meter stay, mirrors, indicators etc. We recommend that this be used with the TYGA lower cowling BPFL-0003, or it can be used with stock Honda NC30 lower and inner cowling too.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
TYGA no: BPFS-0152
SKU: hon-10639 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Seat Cowling (GRP), NSR250 MC28, Stock Shape, Street, Painted Rothmans
€713.10
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFT-0007Painted
SKU: hon-10975 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersComplete Bodykit set Type 9 Black, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, 2015 Type 9 Asteroid Black Metallic Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom. Suitable for all models from 2013-2015
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
TYGA no: BPFS-7028X
SKU: MSX-10313 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopExhaust stay GP-T, Honda RVF400 NC35
€71.27
This exhaust stay is designed to be used with our GP-T kit for the NC35 and attaches to subframe TYLY-0133. Note for NC30, use TYLY-0174
TYGA no: TYLY-0175
SKU: hon-10592 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Clutch cable dizzy club , Honda NSR250 MC18 / MC21
€41.42
lutch Cable, MC21, Dizzy Club. This attractive red clutch cable is an alternative for the Honda OE part 22870-KV3-680. It is ssuitable for MC18 and MC21 models
TYGA no: 101-92-1651-00
SKU: hon-10510 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, Shop, Universal parts, Various parts, Various partsSet, Pipe, Twin Exit System, High Level, MSX125 2021-, Moto Maggot
€769.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Handlebar set 50 mm, silver
€230.31
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 50mm. inverted front suspension. See application chart below.
7 degree angle for a comfortable, yet sporty feel.
Ducati 750/900SS
Ducati Monster, Pre 2010
Honda CBR1000RR 2004
Honda CBR929/954
Honda RC45
Honda RC51 2000-05
Honda RS250 NF5/NX5 USD
Honda RVF400 NC35
Kawasaki ZX10R 2004
Kawasaki ZX14R All
Kawasaki ZX6/RR/636 2003
Suzuki GSXR1000 2001
Suzuki GSXR1100 95-98
Suzuki GSXR1300 All
Suzuki GSXR600 2004
Suzuki GSXR600 92-93
Suzuki GSXR600 94-96
Suzuki GSXR750 1993
Suzuki RGV250 VJ22/23
Suzuki TL1000R
Suzuki TL1000S
Yamaha R1 1998
Yamaha R6 2005
Yamaha YZF750 94-97
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-0078
SKU: alg-10090 Categories: ALL products, Aprilia, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR600RR 2007- 16, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, Shop, Suzuki, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, ZX10R 2011 -15