Set, Pipe, Full Race System, Ninja 250 2008-12, Moto Maggot Silencer
€491.32
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot silencer EXSL-4013
Independent Review:
TYGA Ninja 250R Race Exhaust System Dyno Results
October 29th, 2010 Adam
2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock Exhaust
I’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!
Ninja 250R Dyno results are for the following runs:
Black: Stock Exhaust (no modifications whatsoever)
Blue: Stock Exhaust (snorkel removed)
Red: TYGA Round Aluminum Race System (snorkel removed)
Note: Carbs were not jetted. Fuel mixture screws were not adjusted.
HP Gains:
1) Remove snorkel ( 1.5HP) == 28.1HP!
2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!
Total: 5.7HP ( 4.2HP from TYGA exhaust!)
Weight Comparison (lbs):
Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbs
TYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbs
TYGA no: EXPS-0032
SKU: kaw-10086 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12Handlebar Clamp, Left, Silver, Ninja250/300R
€113.75
Replacement Left handlebar clamp for handlebar set TYLY-0869
Carbon chain guard "stock", Honda NSR250 MC18
€114.99
Chain Guard, Carbon, Stock Shape MC18
Carbon chain guard for NSR250 MC18 (1988-1989). Made to the same dimensions as the original one, it is easy to install and will give your bike a fresh and sporty appearance.
TYGA no: BPCX-7036
SKU: hon-10650 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopFairing set street GP-T, Honda VFR400 NC30
€1,054.33
The ultimate faring set for your Honda VFR400 NC30!!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0144 which is made of GRP (glass reinforced plastic) which is primed and ready for paint**, we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0146
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0144
SKU: hon-10579 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Gearshift lever replacement, universal Tyga
€58.66
Replacement gear lever for your TYGA Step Kit. Complete with bearings.
TYGA no: STAL-0002
SKU: alg-10038 Categories: ALL products, Aprilia, CBR250R 2011 - 15, CBR250RR MC22, CBR400RR NC29, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Hawk/Bros 400/650, Honda, Kawasaki, KSR110 2005- 10, KTM, Ninja 400R 2018-, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RVF400RR NC35, Shop, Suzuki, Various parts, VFR400RR NC30, VTR1000Sp1SP2, YZF-R25/R3Holder, Fork, 41mm
€35.93
This 41mm fork holding tool is very useful when servicing 41mm forks. Now there’s no need for alloy jaws in your vice and less chance of crushing a fork leg.
This handy tool just slips over the stanchion, secures with an M8 cap head bolt and then can be held firmly in the vice while you painlessly perform your maintenance.
Manufactured from 6063 aluminium to ensure no damage to your motorcycle parts in normal use
Racing stepkit black/BLUE adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, black with BLUE Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
You can only use these steps on the MSX125SF if you have a TYGA exhaust
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-1019BLUE
SKU: MSX-10242 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, StepsSet pipe “slip on’ Mesh slash cut” stainless, KTM Duke 390
€168.73
Set, Pipe, Slip On, Mesh, Slash Cut, KTM 390 Duke
Hand welded from stainless steel, this is a direct bolt on to the standard 390 Duke . Just remove the stock silencer and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).