Tyga Step Kit Replacement Peg Spacer, Black, MSX125 Grom
€9.68
Tyga Step Kit Replacement Peg Spacer, Black, MSX125 Grom
Carbon front fender “stock type” , Honda VFR750 RC30
€231.20
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Pro arm wheel spacer silver taper fit , Honda RC30 RC40 RC45 RS250 NX5
€24.56
Taper fit, rear Pro Arm rear wheel spacer. Machined from 7075 T6 aluminium. Light weight and attractive.
This spacer is a direct replacement for the rear wheel Pro Arm spacer on Honda Pro Arm models such as the RC30, RC40, RC45, RS250 NX5. Not suitable for the NC30, NC35, MC28 which uses a flat fitment on where it clamps to the wheel. (See TYLY-0096, TYLY-1096, TYLY-2096 and TYLY-3096)
TYGA no: TYLY-0196
SKU: hon-10526 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various parts, VFR750R RC30Aluminium meterstay, Honda RVF400 NC35
€216.94
Direct replacement of the stock item. Fabricated from aluminium alloy, this Tyga Lyte product weighs approx. 200g. and can be used with all other NC35 components and fairings except the Tyga RC211V style uppers, BPFU-0018 and BPFU-0020.
TYGA no: TYLY-0017
SKU: hon-10154 Categories: ALL products, Bodywork, Honda, RVF400RR NC35, Shop, Various partsExhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopUpper Cowling (Street GRP), NC30, Endurance Style
€293.68
Upper Cowling (Street GRP), NC30, Endurance Style
This is a replacement panel for set BPFS-0152. We recommend you order the complete set which is supplied with all mounting hardware and complete ready to install. This product is intended as a replacement part in the event of an accident or for people wanting to use it for a model other than the NC30`.
This product does not include any mounting hardware or headlight covers.
TYGA no: BPFU-9010(p)
SKU: hon-10738 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, VFR400RR NC30Tail tidy – Fender eliminator TYGA rear exit pipe , KTM RC390
€67.83
Fender Eliminator, KTM RC390, TYGA Rear Exit Pipe
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Note: this product is designed specifically for use with the TYGA under seat exhaust system
See similar product TYLY-0148 which is designed for a bike NOT using an under seat exhaust system
TYGA no: TYLY-0147
SKU: ktm-10068 Categories: ALL products, Exhausts, KTM, RC 390, Shop, Universal parts, Various partsExhaust set slip on, oval carbon silencer with cap, Honda MSX125 GROM
€432.66
Made in stainless steel with spring mounted carbon silencer, and precision made CNC machined end cap. This system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a carbon silencer EXSL-0042.
Feel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won’t be offended. Simply put in the comment box with your order: ‘Please supply with no TYGA logo’. Just let us know your requirements; we want to provide the best possible product for your application
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range.
TYGA no: EXPS-0040
SKU: MSX-10073 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, Shop