Front Fork Preload Adjusters (Pair), ninja 400
€200.55
Front Fork Preload Adjusters, Pair, Ninja 400
These fully functional preload adjusters replace the blank end caps on the stock Ninja 400 front suspension. These caps allow the rider to increase the amount of preload on the internal springs, allowing for a better set up for your riding style or conditions. Essential for spirited riding through the twisties or track days and racing.
This modification allows preload to be increased from the stock setting by 12mm. The minimum setting gives the same preload as stock.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0099k
SKU: kaw-10100 Categories: ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsCarbon exhaust stay, Kawasaki ZXR400L
€95.39
Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.
As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system
DB-killer for stainless exhaust 2 inch
€28.57
Decibel Killer, Silencer, Stainless, 2 Inch
This decibel killer is designed to reduce the noise from TYGA exhausts with 2 inch tail pipes. Suitable for the following models:
EXSL-0017 SUS Oval
EXSL-0040 Silencer, Aluminium, Round, 2 x 380 mm.
EXSL-0047 Silencer, Aluminium, Round, 2 x 450 mm.
It will also physically fit the following silencers, but it should not be used with any carbon silencer due to extreme heat buildup. If you like the designs below and would like the DB killer then please request that the silencer be made with stainless steel sleeve instead of carbon. We will advise on price (Stainles version of silencers below inclusive of db killer included will be less expensive than the carbon version excluding the db killer)
EXSL-0012
EXSL-0016
EXSL-0022
EXSL-0023
TYGA no: EXDK-0003
SKU: alg-10226 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Sprocket rear blank , Universal #520
€67.41
Sprocket, Rear , Blank #520, Aluminium, (Gold)
These blank #520 sprockets are designed with the custom builder/racer in mind.
Finding the correct sprockets for your special is never easy, so we’ve done the hard work for you. All that’s left to do is turn out the center and drill the mounting holes.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
We advise seeking the advice of an experienced machine shop for truing up the sprocket prior to machining the center bore and mounting holes to ensure perfect concentricity and bolt fitting.
Set exhaust with header, race system without silencers
€557.94
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0094
SKU: ktm-10095 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopExhaust Chamber, Left, Side By Side Type, Stainless Steel, MC18
€443.15
Bare replacement left side chamber for EXCS-0003
Carb Service Kit A, 10 pieces, Honda NT650
€24.09
Carb Service Kit A, 20 pieces, Honda NT650
LiteTek Carburettor Seal Kit to suit: Honda NT650 (Hawk 650)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-030 Float Bowl Seal, Material: Flourosilicone (Part of assembly 16010-MR1-691)
2x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
2x WS-001 Pilot Screw Washer, Material: Stainless Steel (Part of assembly 16016-MAH-670)
2x OR-009 Oval Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of assembly 16010-MR1-691
Carbon frame/fairing (pair), NC30
€176.58
Carbon frame in-fill panels for NC30. Replace the nasty plastic original ones with thes elegant carbon ones.
TYGA no: BPCC-7417
SKU: hon-10160 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30