Seat pad, curved
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9002, BPFT-9012, BPFT-9102 and BPFT-9112
TYGA no: BPSP-0001AÂ
SKU: alg-10080 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCarbon front fender stock shape, Honda MSX125 2021 –
€264.55
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCF-7048
SKU: msx-10476 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopKit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
€885.87
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: BPFS-0188
SKU: hon-10980 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSection, Header, Left, Stainless, Ninja 250R
€79.66
Header, Reft. Used on EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017 and EXPS-0018.
TYGA no: EXPT-0012
SKU: kaw-10104 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopFairing set street, Suzuki RGV 250
€509.72
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all the additional fasteners needed to mount it to a stock VJ22.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0040
SKU: suz-10012 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiCarbon belly pan Honda MSX125 GROM
€329.63
Belly Pan, (Carbon), MSX125. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
We also offer the same product with in GRP and GRP/carbon, see BPFL-7128 and BPCL-7228
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPCL-7128
SKU: MSX-10193 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopTriple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks
€714.33
Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks
CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.
This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
There is no provision for the ignition switch, so an alternative mounting location must be found.
Pitch of forks: 200mm (Same as RS250)
Fork Offset: 35mm (Same as NSR250)
Top Clamp: 50mm Bore
Bottom Clamp: 54mm Bore
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0262
SKU: hon-10914 Categories: ALL products, CNC parts, CNC parts, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Seat Panel, Left, Ebony, Ninja 250R 2008 -12
€55.10
Seat Panel, Left, Ebony, Ninja 250R 2008 -12
TYGA no: 36040-0114-H8
SKU: kaw-10201 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, Shop