Set pipe full system with stainless oval silencer, Honda Monkey 125 2018-
€384.49
Set, Pipe, Full Race System, High Level, Monkey 125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( DB Killer included)
All fitting hardware included.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0104 Moto Maggot High level System for Honda Monkey 125
EXPS-0106 Carbon Oval High level System for Honda Monkey 125
Silencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
€151.18
Silencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
This high quality lightweight silencer is made from CNC machine entry and pressed stainless steel exit cap joined by a carbon/Kevlar fiber tube. It is designed very similar to the ones we make for the NSR500V but is a direct fitment for our 250V style chambers and provides the same power characteristics as our other two stroke silencers. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
"Note this product is intended to be used with our exhaust chambers (EXCS-0047) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber."
Compatible Products:
Tyga Performance Two Stroke chambers sets EXCS-0047. (We will be adding more to this list as we get the chance to install with other previous TYGA exhaust systems, Feel free to request advice by email about suitable applications) Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0083 carbon
TYGA no: EXSL-0084
SKU: hon-11047 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28Carbon rear hugger stock shape, Honda Monkey 125 2018-
€162.86
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCH-7042
SKU: msx-10427 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopFront stay steel, standard, Suzuki RGV250 VJ22
€95.39
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-0261
SKU: suz-10210 Categories: ALL products, CNC parts, RGV250 VJ22, Shop, Suzuki, Various partsSeat set style RVF, NC30
€240.81
RVF shape Street Seat Cowling with taillight holes. Single seat, direct replacement for use on the Honda NC30, styled the same as the RVF400 seat cowling but single seat like the RC45.
Seat cowling support is included in kit. This seat cowling uses OEM seat pad and taillight not included
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad. However, modification of stock NC30 taillight is needed because of width of RVF seat cowling is less than NC30
TYGA no: BPFT-9013
SKU: hon-10077 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Side cowling B left (GRP), KTM RC125/RC200/RC390
€150.56
Side Cowling B, Left, Race (GRP), KTM RC125/200/390
This lightweight GRP side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231L TYGA Performance Side Cowling A, Left, Race (GRP), KTM RC125/200/390.
BPCX-7231L TYGA Performance Side Cowling A, Left, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
TYGA no: BPFX-7331L
SKU: ktm-10048 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopStainless silencer 380mm
€231.41
Silencer, Stainless, Round, Four Stroke, 50.8mm., Assy
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
TYGA no: EXSL-0064
SKU: kaw-10066 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersCarbon bodykit complete MiniRacerXtreme, Honda MSX125 GROM
€2,311.76 €2,080.58
Bodywork Set, (Carbon), MRX, MSX125 Grom.This kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from carbon fiber using high quality epoxy resins for strength and lightness and are finished in three layers of UV resistant clearcoat for a glossy finish. No need to paint; just assemble and ride away. With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for budding road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>