Exhaustset race Stainless steel no Silencer, NC30 NC35
€883.63
Great looks and extra power!!
Exhaustset race Stainless steel no Silencer, NC30 NC35
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
EXSL-0012 round carbon, EXSL-0013 Moto Maggot, EXSL0017 Oval Stainless, EXSL-0020 Oval Carbon, Short, and EXSL-0028 Oval Carbon Long
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0002
SKU: hon-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit NSR250 MC21/MC28
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3304
SKU: hon-11267 Categories: 4 stroke exhaust sets, ALL products, CNC parts, CNC parts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop, SilencersPassenger Seat Cover GRP, NC30, Stock Shape, Assy, Painted Type 1
€145.40
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFX-0021type1
SKU: hon-11409 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Screen clear TYGA upper fairing, RC125/RC200/RC390
€52.00
Screen, KTM, RC series Upper Fairing
Replacement screen for KTM RC series Upper Cowling sets BPFS-0170 and BPFS-0171
TYGA no: SCRE-0167
SKU: ktm-10100 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200Lower Triple Clamp, CNC Black, NSR250, MC18
€364.10
Lower Triple Clamp, CNC Black, NSR250, MC18
CNC machined TYGA lower triple clamp for your NSR250.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings.
This product is also sold as part of a set TYLY-1270, Triple Clamp Set, CNC Black, NSR250, MC18
TYGA no: TYLY-1370
SKU: hon-10715 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsOil seal Gearbox output no.27, RGV250/RS250
€36.72
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Upper Cowling, Front, (With Carbon), T13 style, Assy.
€220.69
This products is a replacement part for bodywork sets BPFS-0116 and BPFS-0120
TYGA no: BPCU-9218F
SKU: hon-10812 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Rear sprocket aluminium gold, ZXR400 / ER6
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0112-42T - TYSR-0112-47T
SKU: kaw-10049 - kaw-10054 Categories: ALL products, By product, ER6N-F 2009-11, Kawasaki, Sprockets, ZXR400L