Carbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopShorty fuel tap, NSR250 MC21/MC28
€8.18
Shorty fuel tap, NSR250 MC21/MC28
3D printed.
TYGA no: TYLY-0237
SKU: hon-11069 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsStep adjuster plate, NSR250 MC21/MC8
€86.53
Adjustable Footpeg Hanger Plate (Pair), MC21/28. These CNC machined plates are designed to take the stock Honda hanger plates allowing for three additional positions higher and further back over the stock position. See photos below for before and after with the middle position fitment. Also note fitment of the two bushes supplied for the left side due to the left hanger positions top and bottom not being in the same vertical plane.
Ideal for trackdays and those weekend ‘toe dragging’ hoons!
Positions: Back 20mm. Up 10mm, 20mm & 30mm
Includes all fitting hardware and extended link rod.
TYGA no: STAA-0018
SKU: hon-10367 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopUpper cowling original, NC30
€253.86
Stock shape, replaces the front upper as well as the two side inspection panels. Fits directly to stock or BPFL-0003 lowers.
TYGA no: BPFU-0021
SKU: hon-10084 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon stay silencer left, VFR750F gen 4, 94-97
€54.55
Stay, Carbon, Silencer, Left, VFR750F, Gen 4, ’94-’97
Carbon Silencer stay. A light weight, strong and elegant solution to securing the silencer. Used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: TYLY-0235
SKU: hon-11033 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Carbon belly pan Honda MSX125 GROM
€329.63
Belly Pan, (Carbon), MSX125. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
We also offer the same product with in GRP and GRP/carbon, see BPFL-7128 and BPCL-7228
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPCL-7128
SKU: MSX-10193 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopBearing, Clutch Pressure Plate, MC28
€20.63
Bearing, Clutch Pressure Plate, MC28
TYGA no: 91007-KM7-702
SKU: hon-11080 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Front fender (GRP), HRC NSR250 replica
€75.27
Front Fender, GRP, HRC NSR250 replica
Front Fender, Factory HRC NSR250 Racer Style. This front fender is designed to fit HRC factory NSR250 forks but could possibly made to fit other models with suitable mounting hardware. It is similar in styling to the front fenders used by factory riders such as Cadalora, Biaggi, Ukawa, Okada etc. in the years 1992-1995. The reason for this fender being in our line up is we were lucky enough to source some factory forks and needed a fender to go with them and wanted something as close the original as possible and designed it from photos and memory so while similar, it is not an exact replica. In any case if you look at the fenders used by HRC at that time, you can see that there are slight differences between years and bikes.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc.
TYGA no: BPFF-0007
SKU: hon-10942 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop