Rubber shield head Light, Honda VFR400 NC30
€17.72
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPAC-0016
SKU: hon-11397 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Carbon chain guard rear, Suzuki RGV250 VJ23
€70.24
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
passengerseat Tyga cover, NC30
€55.20
This stylish seat cover replaces the passenger seat pad on the NC30 and is suitable for the seat cowling BPFT-9117 only. (For stock bosywork see BPFX-0021). Simply remove the original seat pad and replace with the cowling. Access to the luggage compartment is still retained.
For use with BPFT-9117 only. Not for use with stock seat cowling.
TYGA no: BPFX-9217
SKU: hon-10070 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon Meter Cover RGV250 VJ21
€31.39
Carbon Meter Cover RGV250 VJ21
Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.
For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.
Fits all VJ21 Models
TYGA no: BPCC-0055
SKU: suz-10135 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsUpper cowling stock , Honda VFR750 RC30
€314.08
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Carbon/kevlar Airbox , Honda RS250 NX5
€520.00
Air Box, Carbon/Kevlar, RS250, NX5
This high quality carbon/Kevlar air box is a direct replacement for the stock HRC one (80101-NX5-770) It is supplied ready to install and includes the following actual HRC or equivalent TYGA aftermarket parts:
Ref Part Number Description Qty Req
1 55204-GJ2-000 GROMMET, OIL TUBE 2
2 64234-NX5-770 SEAL,GAP 3
3 80101-NX5-770 BOX,CARBRETOR (se) 1
4 80102-NX5-770 RUBBER,BOX SIDE 2
5 80108-NX5-770 FILTER,CARB BOX 1
7 90108-GK1-000 BOLT, FLANGE SH (6×12) 2
8 90652-ND5-000 TY-WRAP (2.4×92) 5
9 90654-NX5-770 STUD, FASTENER 35 1
10 90655-NX5-770 GROMMET, FASTENER 1
11 90656-NX5-770 SPRING,FASTENER 35 1
12 90754-NX5-770 STUD, FASTENER 30 (se) 1
13 90755-NX5-770 GROMMET, FASTENER 1
14 90756-NX5-770 SPRING, FASTENER 1
15 91082-NF5-000 RIVET, BLIND (2.4×5.7) 4
TYGA no: BPCX-0004
SKU: hon-10683 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsTYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various parts