Exhaust Chamber, Left, Side By Side Type, MC21/28
€349.54
This is the bare left side replacement chamber for EXCS-0005
Tyga Step Kit Replacement Bush, (Pair), 20mm
€12.44
This replacement part fits to the Tyga step kit on the KTM RC390 etc.
TYGA no: STHB-0020
SKU: ktm-10124 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsFront Fork Preload Adjusters blue/red (Pair), Honda CBR500
€194.60
Front Fork Preload Adjusters, Pair, CBR250R
These fully functional preload adjusters replace the blank end caps on the stock CBR500R, CB500 and CB500X front suspension. These caps allow the rider to increase or reduce the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
This modification allows preload to be reduced (softer) from the stock setting by 3mm, and increased (stiffer) by 9mm, giving a total 12mm adjustment.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional.
Complete Bodykit set Type 2 white, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 2 Pearl Himalayas White Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom.
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
All the products listed in this set are individually available.
TYGA no: BPFS-7028W
SKU: MSX-10111 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopLower cowling GP-T, Honda RVF400 NC35
€216.35
Lower Cowling (GRP), NC35 GP-T, Assy.
This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0145
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9134.
Compatible products:
This product must be used with BPFU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPFC-0038 painted
SKU: hon-10598 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Seat set (grp), CBR250 2011 –
€424.86
This bodywork set includes all the parts needed to convert the seat cowling for the 2011-13 CBR250R to TYGA GP style. Passenger seat cover, taillight, registration illuminating light and undertray and exhaust stay are all included as well as all fitting hardware.
TYGA no: BPFS-0107
SKU: hon-10191 Categories: ALL products, Bodywork, Bodywork and carbon, CBR250R 2011 - 15, Honda, ShopSeal, Clutch Pusher, MC28 SE/SP
€4.54
Seal, Clutch Pusher, MC28 SE/SP
TYGA no: 91302-KV3-781
SKU: hon-11104 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Shim, Side Stand, Yamaha RD350LC (4L0)
€2.46
Shim, Side Stand, Yamaha RD350LC (4L0)
Use this shim on the inner side of the side stand mounting fork to reduce the slack from 37 years of wear.
When the stand mounting fork is worn, the spring pulls the stand in towards the centre of the bike and can interfere with the exhaust pipe.
Shim thickness = 0.5mm
TYGA no: BPSY-0209
SKU: yam-10069 Categories: ALL products, Exhausts, RD350LC 4L0, Stock list, all models