TYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various partsMirror, Left Hand, Ninja 250R 2008 -12
€56.50
Mirror, Left Hand, Ninja 250R 2008 -12
TYGA no: 56001-0098
SKU: kaw-10234 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSeal, Clutch Inner, MC28SP
€13.63
Seal, Clutch Inner, MC28SP
TYGA no: 91207-KV3-781
SKU: hon-11109 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Kit, Bodywork, GRP, stock shape, NSR250 MC28, Painted Rothmans
€1,604.24
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0184
SKU: hon-10970 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersKoppelingdeksel Takegawa voor Honda MSX125
€442.17 €373.83
Koppelingdeksel Takegawa voor Honda MSX125
High performance with high quality and durability.
Specially designed to have quick access to the clutch.
Also room for a thermostat and in/outlet for a oil cooler.
TYGA no: 02-01-0150
SKU: msx-10376 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020Sidehanger right TYGA, Honda RS250 NF5
€47.25
Tyga Step Kit Replacement Right Side Hanger, NF5 RS250R
Exact replica of the HRC part 50630-NF5-000, Holder, R. Step.
TYGA no: STAH-0052
SKU: hon-10548 Categories: ALL products, By model, By product, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopMeter Stay MC18, GP-T Assy
€75.27
Meter Stay MC18, GP-T Assy.
This stay replaces the stock Honda meter stay and allows for fitment of the upper fairing BPFU-9035, BPFU-9135 and BPCU-9035. Supplied complete with plastic bung for quick fairing assembly and removal.
TYGA no: TYLY-0154
SKU: hon-10729 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Silencer carbon round with carbon cap”slip on”, CBR250RR MC22
€459.06
Silencer, Carbon/Carbon End Cap, Round, Slip-On, MC22, Assy.
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from attractive and lightweight carbon tube with carbon exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
TYGA no: EXSL-0116
SKU: hon-11232 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, Silencers