Carbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopExhaust Stay, MC18, GP-T, Right, Assy.
€68.35
Exhaust Stay, MC18, GP-T, Right, Assy.
This replacement exhaust stay is designed to be used with our GP-T kit for the MC18 and attaches to subframe TYLY-0183. Note this kit uses two stays, one for each side:
1 x TYLY-0198L for left
1 x TYLY-0198R for right
NSR250 1988 and 1989 MC18
TYGA no: TYLY-0198R
SKU: hon-10735 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250, NSR250 MC18Tool Set, Shaft Holder, 5~22mm
€95.74
This set includes three sizes of shaft holder. TYTO-0020, TYTO-0021 & TYTO-0022.
Securely hold 18 different size shafts from 5mm~22mm.
For specific information please see the description on the individual item.
Tyga Step Kit Replacement Brake Link, KTM
€12.99
This replacement part fits to the Tyga step kit brake lever on the KTM RC390 etc.
TYGA no: STAC-0012
SKU: ktm-10126 Categories: ALL products, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all modelsTank cover stock shape front red, Honda RVF400 NC35
€148.94
This is a GRP reproduction of the stock OEM front tank cover for the NC35. It can be used either with a stock tank in the normal way or if ordered with BPFX-9201(Red) to make a full painted tank cover for the NC35.
TYGA no: BPFX-9101 (Red)
SKU: hon-10516 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopSeat set street GRP GP-T, Honda NSR250 MC21
€846.53
Kit, Seat Set, GRP (Street), MC21 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC21 GT-T seat cowling kits to choose from:
BPFS-0129 Street GRP
BPFS-0130 Race GRP
BPFS-0131 Street Carbon
BPFS-0132 Race Carbon
TYGA no: BPFS-0129
SKU: hon-10456 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopCarbon tank cover Kitaco, Honda MSX125 GROM
€74.49 €37.10
Tank Cover, (Carbon), MSX125, made by famous Japanese minibike company Kitaco
TYGA no: APK26K17540ZA
SKU: MSX-10077 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopSilencer carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40 kg) is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0067 Shorty Aluminium
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0065
SKU: alg-10258 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Suzuki RGV250