Set pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, ShopCarbon swingarm covers, Honda CBR1000 2008 – 11
€235.94
These lightweight carbon covers fit over the stock swing arm and it is designed to protect against scratches and damage to your swing arm in the event of an accident. The right side also incorporates a ‘sharkfin’ compulsory in some classes of racing.
TYGA no: BPCC-8001
SKU: hon-10448 Categories: ALL products, Bodywork, CBR1000 2008-11, CBR1000 2012-, Honda, ShopSection, Collector, Final, Stainless, NC30/35
€135.29
Final Collector and combined tailpipe. Used on:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
TYGA no: EXPT-7002
SKU: hon-10851 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsFront Fender, Carbon, Stock Shape, VJ21
€190.60
Front Fender, Carbon, Stock Shape, VJ21
Real carbon fibre reproduction of the stock Suzuki RGV250 VJ21 front fender.
Finished in high gloss, adds beauty and reduces unsprung weight. (Weight of part approx. 0.26 kg)
TYGA no: BPCF-0019
SKU: suz-10127 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Collar manifold, VFR750F gen 3 and 4, 90-97
€8.68
Collar manifold, VFR750F gen 4, 94-97
Collar manifold, VFR750F used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXMN-0119
SKU: hon-11030 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Tyga step replacement left side hanger , Yamaha R25/R3
€40.65
Tyga Step Kit Replacement Left Side Hanger, Yamaha R25/R3, Assy. Complete with mounting bolts.
TYGA no: STAH-0049
SKU: yam-10052 Categories: ALL products, CNC parts, Stock list, all models, Yamaha, YZF-R25/R3Carbon front fender, Honda Hawk/Bros
€153.21
Front Fender, Carbon, Hawk/Bros
This carbon version of the stock front fender will enhance the beauty of your Hawk and make it stand out from the crowd!
TYGA no: BPCF-7066
SKU: hon-11166 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, ShopScreen fastener set
€12.50
This set of TYGA screen fasteners consists of 10 X black zinc coated M4 bolts, and clear plastic nuts and washers. Can be used with all Tyga Performance bodywork and screens as well as most OEM manufacturers products.
TYGA no: FAPS-0001
SKU: alg-10077 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, CBR400RR NC23, CBR400RR NC29, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS250, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30