Carb Service Kit, 14 pieces, Honda NSR250 MC16/18/21
€81.92
Carb Service Kit, 14 pieces, Honda NSR250 MC16, MC18, MC21
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC16, MC18 and MC21
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-034 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KM9-505)
2x TCG-001 Top Cap Gasket, Material: Gasket Paper (Part of Honda kit: 16010-KM9-505)
2x FB-035 Body O-Ring, Material FKM ((Part of Honda kit: 16010-KM9-505)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KM9-505)
2x OR-016 O-Ring, Material: Viton FKM (Part of Honda kit: 16010-KM9-505)
2x OR-012 Fuel Pipe O-Ring, Material: FKM (Part of Honda kit: 16010-KM9-505)
2x CS-004 Choke Plunger Cap Material: HNBR (Part of Honda kit: 16046-KV3-950)
Suitable for the following carbs:
MC16: TA10
MC18 ’88: TA20
MC18 ’89: TA21
MC21: TA22
TYGA no: CKA-Honda-MC16,18,21
SKU: alg-10372 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsSilencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Bracket front brake CNC silver 84mm Brembo, Kawasaki Ninja 400
€48.00
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Kawasaki Ninja 400
CNC machined brake caliper support for your Kawasaki Ninja 400.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your Ninja 400.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Torque Setting: 35Nm
TYGA no: TYLY-0210
SKU: kaw-10155 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-TYGA stepkit replacement brake Master cylinder holder plate, Ninja 400
€32.64
TYGA Step Kit Replacement Brake Master Cylinder Holder Plate, Ninja 400
Seat Cowling (GRP), NX5 RS250R (early model style)
€290.93
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Please see our range of NX5 bodywork section for sets that use this product and similar items.
TYGA no: BPFT-9236
SKU: hon-10941 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon set, rear hugger and chain guard, KTM RC125/200/390
€235.46
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFS-0226
SKU: ktm-10205 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsWheel Bearing Set, Rear MC18/21
€45.83
Replacement Rear wheel bearing. OEM quality assured
3x Bearings included
Also includes sprocket carrier bearing
TYGA no: TYPP-0010
SKU: hon-10834 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsBearing, Countershaft, NSR250 MC18, MC21, MC28
€11.30
This NSK bearing is a high quality, direct replacement for OEM bearing 91024-KV3-003.
Extensively tested and used on many TYGA engines.
TYGA no: TYPP-0006
SKU: hon-10838 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Universal parts, Various parts, Various parts, Various parts