Front Fork Preload Adjusters black/red (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Black/Red
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in black and gold anodised finish, (see TYLY-0097 and TYLY-1097 for other colour versions too) these adjusters are as beautiful as they are functional.
TYGA no: TYLY-2097
SKU: MSX-10135 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsCarbon engine cover set, Honda CBR1000 2008 -15
€157.26
These lightweight carbon covers fit over the engine case and has kevlar reinforcing, designed to protect your engine against scratches and damage in the event of an accident.
TYGA no: BPCC-8101
SKU: hon-10447 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopCarbon Front fender, Aprilia RS125 (2007-2010)
€208.08
This is a stock shaped fender for the 2007-2011 Aprilia RS-125 complete with mounting holes pre drilled for ease of fitment.
Weighs a fraction of the stock one at approx. 240g.
Let your bike stand out from the crowd with this beautiful carbon product
TYGA no: BPCF-7107
SKU: apr-10009 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopSidehanger right, NC30 NC35 (Tyga)
€54.38
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: STAH-0004
SKU: hon-10110 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set, 4 pieces Headlight adjustment springs
€1.82
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: exsg-0005
SKU: hon-11524 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partspassengerseat Tyga cover, NC30
€55.20
This stylish seat cover replaces the passenger seat pad on the NC30 and is suitable for the seat cowling BPFT-9117 only. (For stock bosywork see BPFX-0021). Simply remove the original seat pad and replace with the cowling. Access to the luggage compartment is still retained.
For use with BPFT-9117 only. Not for use with stock seat cowling.
TYGA no: BPFX-9217
SKU: hon-10070 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Exhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopSpring puller (type 1) , universal
€30.24
Handy, tough, spring puller ideal for removal of exhaust mounting springs in those difficult to get places. Say goodbye to slipping vice grips and twisted strands of wire.
Also gives your race pit a professional edge for that psychological advantage over the competition!
A must for every workshop!!
TYGA no: TYTO-0017
SKU: alg-10009 Categories: 2 stroke exhaust sets, 4 stroke exhaust sets, ALL products, By product, Cagiva, Exhausts, Exhausts, Honda, Mito 125, MSX125 2013 - 2015, MSX125SF 2016 -2020, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Tools, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZ250 2005-15