Carbon swing arm cover, Honda NSR250 MC21
€284.44
Swing Arm Cover, Pair, (Carbon) Honda NSR250, MC21
These lightweight carbon covers fit over the stock swing arm on the NSR250 MC21.
They are designed to protect against scratches and gives that NSR GP250 look to your bike! Fit in minutes.
TYGA no: BPCC-9212
SKU: hon-10654 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopAirbox Carbon/kevlar, Honda NSR250 MC21/MC28
€635.04
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0007
SKU: hon-11071 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Osram light
€8.36
12V 35/35W Halogen Reverse type bulb. This is a top quality halogen replacement bulb for use with the the TYGA headlight types below. It claims to put out up to 50% more light than other bulbs.
Fitted to all our kits with compatible headlights from March 2010. Useful retrofit for TYGA kits bought previous to then. Not compatible with H4 headlights used originally on most Japanese sport bikes.
BPLT-0002
BPLT-0003
BPLT-0011
BPLT-0012
BPLT-0017
BPLT-0021
BPLT-0025
Not suitable with BPLT-0004 as used with GP250 and RGV250 GP body kits. If you need a replacement for this kit, send us an email and we will send a specific bulb for this light.
TYGA no: 62337SVS/RV
SKU: alg-10027 Categories: ALL products, Aprilia, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, Honda, MRX, MSX125 2013 - 2015, RS250, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30Rear wheel spacer kit aluminium, Honda NSR250 MC21
€73.71
Replace the heavy steel rear wheel spacers and wheel bearing distance spacer with these lightweight 6061-T6 aluminium spacers. Lighter weight allows the suspension to react more positively, so better handling and good looks!
TYGA no: TPER-0039Â
SKU: hon-10396 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopFuel Tank, GRP, NSR250, MC28, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-9001Painted
SKU: hon-10971 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersFront spacer wheel kit, fork conversion CBR600RR 2007 onwards
€13.26
Wheel, Front, Spacer Kit, (2007-onwards) CBR600RR fork conversion
These spacers are designed to allow the standard NSR250, NC30/35 front wheel to be used together with the ’07-final model CBR600RR forks when used with our CBR600RR triple clamp conversion.
Note that the upper/lower triple clamp bore dimensions are 48mm – 54mm.
The standard ’07-final axle shaft should be used, and is the correct size for the NSR/NC wheel.
The NSR/NC disc mounting face is 100mm wide. The disc pitch, centerline to centerline of the rotors should be 130mm, and the discs 310mm in diameter.
VFR750R RC30 discs can be used.
TYGA no: TPER-0006
SKU: hon-10965 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsSet pipe Stainless full race system “maggot silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.
As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system
Bracket front brake CNC black 84mm Brembo, Kawasaki Z125
€45.19
Bracket, Front Brake, 84mm Brembo Conversion, Black, Kawasaki Z125
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0134)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0