Registration/License Plate Holder, (Carbon), T13 Assy.
€136.75
This product is made using carbon fiber and holds the registration/license plate for use with our T13 seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using only GRP, see BPFX-9118
This product attches by means of two bolts on an angled back flat plate and could be adpted to be used with other models with a flat undersurface.
TYGA no: BPCX-9118
SKU: hon-10823 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Bolt, front brake rotor mounting, Honda
€2.38
Front brake mounting bolt. Bolt, M6 thread with a dome head and 6 mm. Allen key fitting
Replace those nasty corroded bolts with these Honda OEM shiny new ones, your bike deserves it! Suitable for most Honda models including:
CBR250R
MC18
MC21
MC22
MC28
NC23
NC30
NC35
RC30
RC40
RC45
etc.
TYGA no: 90106-KGH-600
SKU: hon-10500 Categories: ALL products, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Carbon license plate holder (Tyga), Aprilia RS250
€112.30
This product holds the registration/license plate for use with our Aprilia RS-250 GP style seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using carbon, see BPFX-9130
TYGA no: BPCX-9130
SKU: apr-10072 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopTriple Clamp Set, 3D, CNC Silver, CBR600RR Forks to fit CBR250RR MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3309
SKU: hon-11260 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersBoyesen Dual reeds, Yamaha RD350 LC YPVS
€86.78 €82.79
Boyesen Dual reeds, Yamaha RD350
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.
1 engine = 1 set
TYGA no: boyesen1
SKU: alg-10374 Categories: ALL products, High performance, RD350LC 4L0, Shop, YamahaFuel tank (Ram air), Honda RS250R NX5
€1,321.68
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFG-0002
SKU: hon-11445 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon airducts (pair) gloss , Honda CBR250 MC22
€317.07
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7110
SKU: hon-11462 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersShroud inner right, Honda MSX125 GROM
€6.86
Shroud inner right OEM Honda part
TYGA no: 83560-K26-900
SKU: MSX-10024 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop