Nut, 6mm, L/H thread, MC28
€2.28
Nut, 6mm, L/H thread, MC28
TYGA no: 90310-634-980
SKU: hon-11129 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Set exhaust, race system double maggot , KTM RC390 2014 – 2016
€726.37
.Set, Pipe, Race System, RC390, Stainless Moto Maggot
Update your bike with this great TYGA performance, KTM power part!!
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual under seat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied or compatible with a decibel killer for noise reduction and is very loud! Please be warned!
Compatibility
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with standard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0062 for similar system.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
Customization
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore. No decibel killer used.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0062
SKU: ktm-10059 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopHeadlight, GP-T, Assy.
€369.67
Headlight, GP-T, Assy.
This stylish headlight, designed by, and unique to TYGA Performance consists of a total of 4 LED light units arranged in two pairs with 2 on dip and all four illuminated on high beam. LEDs use very little power and draw a lot less current than the stock headlight unit. This TYGA headlight will make your presence known to other road users and emit a bright blue/white light.
Note this product does not comply to any road legal regulations and it is not recommended for high speed riding at night on unlit roads.
Compatible Parts:
Tyga Upper Cowling BPFU-9035
TYGA no: BPLT-0027B
SKU: hon-10721 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Honda, NSR250, NSR250 MC18Tail tidy – Fender eliminator standard pipe , KTM RC390
€67.83
Fender Eliminator, KTM RC390, Standard Fender Replacement
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Note: this product is designed for motorcycles NOT using an underseat exhaust system.
See similar product TYLY-0147 which is designed specifically for use with the TYGA under seat exhaust system
TYGA no: TYLY-0148
SKU: ktm-10067 Categories: ALL products, Exhausts, KTM, RC 390, Shop, Universal parts, Various partsPassenger seat cover red/flad black, Honda MSX125 GROM
€132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in red with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 R/F
SKU: MSX-10149 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopTank shrouds (grp) black with duct and grill, Honda MSX125 GROM
€147.50 €104.00
Tank Shrouds, With Duct and Grille, (Pair), (GRP), MSX125 Grom, Asteroid Black. Painted to match your bike. Looks cool and makes your bike stand out from the crowd.
Pictures of the bike show carbon version of this product (BPCX-7828) installed.
TYGA no: BPFX-7828 B
SKU: MSX-10286 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsFuel hose clip, RC36-2 RC30 style
€8.22
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSY-0347
SKU: hon-11450 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistMeterstay MiniRacerXtreme, Honda MSX125 GROM
€199.00
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>