Triple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks
€714.33
Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks
CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.
This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
There is no provision for the ignition switch, so an alternative mounting location must be found.
Pitch of forks: 200mm (Same as RS250)
Fork Offset: 35mm (Same as NSR250)
Top Clamp: 50mm Bore
Bottom Clamp: 54mm Bore
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0262
SKU: hon-10914 Categories: ALL products, CNC parts, CNC parts, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Section, Pipe, Underbelly, Full Race System, MSX125 Grom
€150.88
Section, Pipe, Underbelly, Full Race System, MSX125 Grom
Suitable for our exhaust systems EXPS-0064 and EXPS-0068
Set, pipe full race system round aluminium silencer LH exit, VFR750F gen 4, 94-97
€1,107.23
Set, pipe full race system round aluminium silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0124
SKU: hon-11017 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Carbon lower cowling, Aprilia RS250 Tyga, assy
€632.02
This lower cowling is suitable for our Aprilia RS-250 kits, BPFS-0100 and BPFS-1100.
This product is compatible with upper cowling BPFU-9030, BPFU-9130 and BPCU-9030. Will not fit stock Aprilia upper cowling
TYGA no: BPCL-9030
SKU: apr-10069 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopTyga Step Kit Replacement Left Side Hanger, MSX125 Grom, Silver, Assy.
€90.48
Replacement left hanger for your MSX125 Grom TYGA Step Kit. Complete with mounting hardware and bushes.
Steering stopper MiniRacerXtreme, Honda MSX125 GROM
€17.45
Steering Stopper, MSX125 Grom
This steering stopper is designed specifically for our MRX project to limit steering movement to the confines of the body kit. However, this can be used separately with the standard set up for anyone wanting to limit steering movement. Easy to install and fits in minutes.
Fitting Instructions:
Remove the front brake stay and the horn wiring stay from the lower triple clamp temporarily. Install the steering stopper as shown in the photo Reinstall the stays in the standard position holding the steering stopper in place. Test to make sure the steering operates smoothly and no wires, cables or hoses are getting pinched or rubbing on anything they shouldn’t do.
TYGA no: BPSY-0122
SKU: MSX-10270 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopFront sprocket 14T, Honda MSX125 GROM
€7.37
14T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.
TYGA no: JTA-H-WA-420-F-14T
SKU: MSX-10085 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Sprockets, SprocketsFront fender,Suzuki RGV 250
€71.75
Front fender,Suzuki RGV 250 (suz-10008)
This is apart made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
TYGA no: BPFF-9008
SKU: suz-10008 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki