Footpeg replacement short, universal Tyga
€34.69
Replacement foot peg for your TYGA Step Kit, short type. Complete with M8x55 taper socket bolt for mounting and 3x 8mm washers. Ideal for racing for better clearance when fully leant over.
We recommend securing with thread locking agent to resist vibration.
Note compare to similar product STAP-0001 which is the same except 93 mm. instead of 78 mm. in length
TYGA no: STAP-0003
SKU: alg-10133 Categories: ALL products, Aprilia, CBR250R 2011 - 15, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Kawasaki, KTM, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RS250R NF5 / NX5, RVF400RR NC35, Shop, Suzuki, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-R25/R3Carbon tankcover front RVF, NC35
€201.80
This is a carbon reproduction of the stock OEM front tank cover for the NC35. It can be used either with a stock tank in the normal way or if ordered with BPCX-9201 to make a full carbon tank cover for the NC35.
TYGA no: BPCX-9101
SKU: hon-10142 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopSeat cowling (GRP), stock shape street, Honda VFR750 RC30
€386.36
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Wheel crash bungs, Honda MSX125 Grom 1st + 2nd gen.
€35.39
Wheel Crash Bungs, genuine Honda part, these fit both the front and rear axle. Order two sets for one complete bike
TYGA no: APK2690306TA
SKU: MSX-10034 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsTank filler cap racing , Yamaha/Ducati
€69.87
Tank Filler Cap, Keyless, Racing Type, Yamaha/Ducati
This keyless racing fuel tank filler cap is CNC machined from billet alminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for the following models:
YAMAHA
- R6 (All Years
- R1 (All Years)
- FZ-6 (All Years)
- FZ-1 (All Years)
- FZR1000 (All Years)
- FZR750 (All Years)
- FZR400 (All Years)
- FZR250 (All Years)
- TZR250 3MA, 3XV
- YSR50 (All Years)
- YZF1000 (1997-98)
- YZF600 (1994-97)
- YPVS-F2 RD350/RZ350 (1986)
Ducati :
- 748 (all years)
- 851 (all years)
- 888 (all years)
- 916 (all years)
- 996 (all years)
- 998 (all years)
- Monster S4R S2R etc.. (all years)
- 600 750 and 900 SS (all years)
- 600 750 900 ST2 ST4 (all years)
- 848, 1098, 1198 (all years)
- Desmo RR
TYGA no: TYLY-0111
SKU: alg-10191 Categories: 848 / 1098 / 1198, ALL products, Desmosedici RR, Ducati, Monster, Shop, Tank fillers, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Lower cowling track , Honda VFR750 RC30
€165.11
Lower cowling “track”, Honda VFR750 RC30 (hon-10567)
Direct replacement for OEM Honda lower cowling and due to being constructed with strong flexible epoxy resin is thinner and therefore about 65% the weight of the stock lower cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 upper cowlings.
Stud, Exhaust #2 8×22, MC28
€3.45
Stud, Exhaust #2 8×22, MC28
TYGA no: 90035-KV3-950
SKU: hon-11131 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Triple clamp set CNC silver, Honda NSR150
€142.52
CNC machined TYGA top triple clamp for race use ( not including detachable key holder) for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder which is positioned to allow use of the steering lock can be bought separately or order as triple clamp set TYLY-0051.