Set pipe full system no silencer (maggot system) , Honda Monkey 125 2018-
€166.16
Set, Full System, Monkey 125 (No Silencer)
Can be used with TYGA Moto Maggot Silencer EXSL-8213(p)
See also EXPS-0104 For complete set
Bracket rear brake CNC silver 84mm Brembo, Honda NSR250 MC28
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc brake to get the correct clearance.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1089)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0089
SKU: hon-10431 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, ShopLower cowling GP250/500/, Honda NSR250 MC18/MC21/MC28
€259.38
Modelled from NSR500V lowers and converted to fit a street NSR250 with either stock or Tyga exhaust system.
A kick start stopper is provided in the kit to give clearance with the new fairing and the kickstarter on the furthestmost part of the kickstart swing.
Can be used with the following upper cowlings.
Compatible Parts:
Tyga upper cowlings, BPFU-0004, BPFU-0005 and BPFU-0015
TYGA no: BPFL-0002
SKU: hon-10232 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopTYGA / Kitaco Power up kit stainless , Honda MSX125 GROM
€741.04 €666.94
TYGA/KITACO Power Up Kit, Stainless Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0096
SKU: MSX-10304 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopHandlebar tube assy, kawasaki ninja 2008 -18
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides for Ninja250R /300R
Comes fitted with plastic bungs in each end.
Turn signal Set black/blue, Honda RC30 style
€192.87
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPLT-0038
SKU: hon-11546 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistClamp/manifold, NSR150/250
€24.06
This is a replacement part for Tyga chambers. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXCS-0002
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMC-0001
SKU: hon-10379 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSide fairing right RC211V, NC30 NC35
€110.40
This a replacement part for bodywork sets BPFS-0012* , BPFS-0013, BPFS-0014, BPFS-0032, BPFS-0033. This part renamed from BPFU-9118R
*fits later model BPFS-0012, earlier BPFS uses another parts. If in doubt email us first before ordering
TYGA no: BPFU-9120R
SKU: hon-10095 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30