Kit, Fairing Set (GRP), Honda NX5 1993 RS250R (early model style)
€870.62
Kit, Fairing Set (GRP), Honda NX5 RS250R (1993 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Lower Cowling, (GRP) NX5 RS250R (1993 Style) (BPFL-9136)
The lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9236
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
TYGA no: BPFS-0180
SKU: hon-10940 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shoplower cowling stock shape, Honda RFV400 NC35
€161.36
Street one piece lower cowling with open bottom as stock. Direct replacement for OEM Honda lower left, right and inner cowls. Can be used with most of our range of upper cowlings.
TYGA no: BPFL-0103
SKU: hon-10709 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Carbon set hugger w chainguard, Suzuki RGV 250
€355.59
Carbon set, Suzuki RGV 250
A set contains:
Front fender
Rear Hugger with chainguard
Update your bike with these beautiful carbon products, same shape as original. Fits in minutes.
Buy a complete set and it saves you money.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
TYGA no: BPFS-1058
SKU: suz-10188 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiLower cowling (GRP) white, Honda MSX125SF GROM
€332.31
Lower Cowling, (GRP) White MSX125SF, Grom 2nd gen 16-17
Lower Cowling, (GRP), White, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428W
SKU: msx-10383 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopCarbon carburettor tray, Honda VFR400/RVF400
€180.64
The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.
The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.
No special tools are required to fit the carb tray.
TYGA no: BPCX-9309
SKU: hon-10360 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Screen MiniRacerXtreme, Honda MSX125 GROM
€52.00
Screen MiniRacerXtreme, Honda MSX125 GROM
This screen fits the TYGA bodywork
TYGA no: SCRE-0163- SCRE-0164
SKU: msx-10260 - msx-10261 Categories: ALL products, Aprilia, Bodywork, Honda, MRX, MSX125 2013 - 2015Lower Cowling, (GRP) NX5 RS250R (late model style)
€210.73
Lower Cowling, GRP, NX5 RS250R (Early Model Style)
The lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9136
TYGA no: BPFL-9136
SKU: hon-10945 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopKit, Complete Body Set, Stock Shape, Solo Seat, with Fuel Tank, NC30, Painted Type 1
€2,957.86
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0222
SKU: hon-11399 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30