Carbon set, rear hugger and chain guard, KTM RC125/200/390
€235.46
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFS-0226
SKU: ktm-10205 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsBelly Pan, (GRP) RD250/350LC (4LO)
€181.29
Belly Pan, (GRP) RD250/350LC (4LO)
This belly pan faithfully compliments the classic lines of the legendary ‘Elsie’ along similar lines to the ones used back in the day, complete with the obligatory air scoops on either side. Although the design is traditional, the construction is modern and we have taken advantage of modern materials and techniques to bring you a better product than others on the market.
The belly pan itself is made from high strength epoxy resin and 200 gram glass fabric, making it flexible and light and attractive both on the inside and out. The mounting brackets are laser cut for precision and better aesthetics and they are covered by a plastic coating to give them a firm but kind grip on the frame rails. There is a great deal of adjustability built into the design and to allow our customers to mount this part in exactly the position they desire, based on other modifications such as exhausts, we supply it undrilled.
This product is supplied primed, however, will require minor preparation, before it’s ready for paint.
This product is suitable for stock and our exhaust system, EXCS-0044 which we offer for the RD350LC (4L0)
As well as this GRP (Glass reinforced plastic) version, we also supply a carbon version, BPCL-7032
Brake lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Brake lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
Seat cowling hump TYGA, Suzuki RGV250 VJ21
€198.72
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021R and L. for installation.
TYGA no: BPFT-9021H
SKU: suz-10101 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Carbon front brake reservoir stay, Honda VFR400 NC30
€36.86
Replacement for tired the stock front brake resevoir stay. This trick carbon stay can be used as a direct replacement for the heavy steel one on the NC30 VFR400R. It weighs about 25% of the original and as well as being stiff and strong, looks like it belongs on a GP bike.
TYGA no: BPCC-9017
SKU: hon-10418 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Manifold, Right, Ninja 250/300
€29.65
This is a replacement part. When ordering an exhaust system, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXPS-0047, EXPS-0048, EXPS-0049 and EXPS-0050
Tank filler cap racing , Suzuki 4 hole
€69.87
Tank Filler Cap, Keyless, Racing Type, Suzuki 4 Hole
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for Suzuki sportsbike models which have 4 bolt mounting arrangement. See also the 3 hole model we supply (If in doubt, remove your existing filler cap to see which bolts actually mount to the tank and which ones are dummy ones for the outer ring only). Suitable for the following models:
- RGV250 VJ21, VJ22 and VJ23
- GSXR600 (1997 – 2003)
- GSXR750 (1996 – 2003)
- GSXR1000 (2001 – 2002)
- GSXR1300 (1999 – 2007)
- GSX600F (1998 – 2001)
- GS600F (2000 – 2001)
- GSF1200/Bandit 1200 (2001 – 2004)
- SV650 (1999 – 2002)
- TL1000S/R (All Years)
See also Suzuki 3 hole pattern
TYGA no: TYLY-0112
SKU: alg-10192 Categories: ALL products, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250, Tank fillers, Various parts, Various partsSet pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.