Hi Flo reeds (set) assy, Honda NSR250 MC21/MC28
€128.63
Complete set of reeds for your Honda NSR250 MC21 MC28, for that extra performance and throttle response.
Kit includes:
– HRC style stuffer for improved intake mixture flow.
– Reed stopper lifter plates to increase intake area for increased peak performance and over-rev.
– Genuine Honda reed valve gasket
Please order one set per engine.
Included parts: 2 x Reed valves complete, reed valve gasket.
Graph compares MC21 before (red line) and after (blue line), Hi Flo reed valve stuffers and carbon reeds fitted.
TYGA no: TPER-0001
SKU: hon-10324 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopUpper cowling set GRP endurance , Honda VFR400 NC30
€434.45
Upper Cowling Set, Endurance, (GRP) NC30
This Suzuka 8 Hour inspired cowling is supplied with four headlight covers, two unpainted ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC30 headlight and mounts to the bike using the mounting hardware provided (Upper stay and front mounting bolt and spacer bush. All the other parts mount the same way as stock including meter stay, mirrors, indicators etc. We recommend that this be used with the TYGA lower cowling BPFL-0003, or it can be used with stock Honda NC30 lower and inner cowling too.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
TYGA no: BPFS-0152
SKU: hon-10639 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Carbon belly pan Honda MSX125 GROM
€329.63
Belly Pan, (Carbon), MSX125. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
We also offer the same product with in GRP and GRP/carbon, see BPFL-7128 and BPCL-7228
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPCL-7128
SKU: MSX-10193 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon air duct standard, Aprilia RS250
€90.32
This carbon air duct is the same shape as the stock Aprilia air duct used on the later Mark II RS250 (1998-2008) Suitable for stock bodywork only.
It adds bling factor and weighs only 120 grams!
Update your bike with this great carbon product, direct replacement of the original part
Not suitable for TYGA bodywork kits (BPFS-0100 and BPFS-0101).
TYGA no: BPCX-9430
SKU: apr-10057 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopTriple clamp set CNC silver, NC35
€673.57
CNC machined TYGA triple clamp set for your RVF400 NC35.
These stylish, all aluminium triple clamps are a direct replacement for the notoriously easy to bend, OEM NC35 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0242
SKU: hon-10158 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopBike cover Honda
€58.87
Genuine Honda Bike Cover, fitted with elastic for secure installation. I supplied with its own storage pouch.
TYGA no: 08P34-KPP-700
SKU: hon-10474 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, PCX150, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
TYGA no: LEVC-7003
SKU: ktm-10077 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-Set, Water Hose (6 pcs) NSR250 MC21/28
€70.73
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: NHPS-0009
SKU: hon-11241 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts