Lower Cowling (GRP), MC18, GP-T, Assy.
€183.50
Lower Cowling (GRP), MC18, GP-T, Assy.
This product is designed to be used with BPFU-9035 as part of the Bodywork set BPFS-xxxx
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9035.
This product is supplied with lower mounting stays on the left and right.
Compatible products:
This product must be used with BPFU-9035
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting.
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9035
SKU: hon-10728 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Carb Service Kit, 14 pieces, Honda NSR250 MC16/18/21
€81.92
Carb Service Kit, 14 pieces, Honda NSR250 MC16, MC18, MC21
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC16, MC18 and MC21
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-034 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KM9-505)
2x TCG-001 Top Cap Gasket, Material: Gasket Paper (Part of Honda kit: 16010-KM9-505)
2x FB-035 Body O-Ring, Material FKM ((Part of Honda kit: 16010-KM9-505)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KM9-505)
2x OR-016 O-Ring, Material: Viton FKM (Part of Honda kit: 16010-KM9-505)
2x OR-012 Fuel Pipe O-Ring, Material: FKM (Part of Honda kit: 16010-KM9-505)
2x CS-004 Choke Plunger Cap Material: HNBR (Part of Honda kit: 16046-KV3-950)
Suitable for the following carbs:
MC16: TA10
MC18 ’88: TA20
MC18 ’89: TA21
MC21: TA22
TYGA no: CKA-Honda-MC16,18,21
SKU: alg-10372 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsTop Triple Clamp Nut (M24 x1) GROM
€21.16
Top clamp nut machined from 7075 T6 aluminium. Light weight and good looking. Clear anodised for a long lasting finish.
This nut is a direct replacement to the top nut on many Honda machines, such as MSX125, MC18~28, RVF400, NSR150SP, CBR250/400/500, CBR900. (not suitable for NC30, RC30, SP2 but fits SP1)
The thread is M24x1
Torque setting: 65Nm
TYGA no: TYLY-0127
SKU: MSX-10082 Categories: ALL products, CBR250R 2011 - 15, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various partsCarbon exhaust guard, Honda NR750
€130.42
Exhaust Guard, Carbon, Honda NR750
This lightweight carbon exhaust guard replaces the heavy and ugly steel stock one and is molded the same shape for easy installation. This product is made using specially formulated high temperature resin and has a backing layer of carbon/Kevlar. Note this should be installed with mat, heat guard 50608-MT7-000 (NOT INCLUDED) or similar to prevent excessive heat reaching the guard.
Please note the photos of the heat mat 50608-MT7-000 are for reference and is not included with this product.
Bearing Headstock Upper
€47.34
Bearing Headstock Upper
TYGA no: 91015-KT8-005
SKU: hon-11121 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Belly pan (GRP/carbon) White, Honda MSX125 GROM
€309.98 €217.00
Belly Pan, (GRP/Carbon), MSX125, painted Himalaya white to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPFL-7128
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPCL-7228 W
SKU: MSX-10194 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopBrake lever replacement (up), universal 3 Tyga
€41.44
Replacement rear brake lever for your TYGA Step Kit. Complete with bearings.
TYGA no: STAL-0001Â
SKU: alg-10083 Categories: ALL products, Aprilia, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, KTM, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS250, RVF400RR NC35, Shop, Suzuki, Various parts, VFR400RR NC30