Upper stay, Tyga stock MC21/MC28
€130.42
Lightweight GP style upper stay to use on the GP style fairing
Compatible Parts
Upper cowlings, BPFU-0004, BPFU-0005, BPFU-0015 and BPFU-9012. For use with MC18, MC21 and MC28 models only
TYGA no: TYLY-0003
SKU: hon-10291 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC21, NSR250 MC28, ShopStud, Exhaust #2 8×22, MC28
€3.45
Stud, Exhaust #2 8×22, MC28
TYGA no: 90035-KV3-950
SKU: hon-11131 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Upper Cowling, GRP, RC36-2, RC30 Style, Race, Assy
€267.22
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFU-7149
SKU: hon-11482-1 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistHandle bar set silver, Honda CBR500
€234.92
Handlebar Set, Silver, CBR500R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well allowing more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Black, order TYLY-1669
Silver, order TYLY-0669
Please note the steering is limited when using this product and as a result, the steering lock cannot be used.
Carbon seat cowling, stock shape, NXA RS250R (2001- ’08)
€908.01
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Silencer stainless steel round 86mm (4 stroke) 38,1mm
€259.22
This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
Supplied with silencer clamp and fitting hardware.
The Dimensions of this silencer are as follows:
I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.
TYGA no: exsl-0019
SKU: alg-10111 Categories: 4 stroke exhaust sets, ALL products, By model, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, Exhausts, Honda, Shop, SilencersCarbon chain guard rear, Suzuki RGV250 VJ23
€70.24
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23