Upper cowling stock , Honda VFR750 RC30
€314.08
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Screen Clear, Honda NX6 NSR500V
€52.00
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Carbon/kevlar Airbox , Honda RS250 NX5
€520.00
Air Box, Carbon/Kevlar, RS250, NX5
This high quality carbon/Kevlar air box is a direct replacement for the stock HRC one (80101-NX5-770) It is supplied ready to install and includes the following actual HRC or equivalent TYGA aftermarket parts:
Ref Part Number Description Qty Req
1 55204-GJ2-000 GROMMET, OIL TUBE 2
2 64234-NX5-770 SEAL,GAP 3
3 80101-NX5-770 BOX,CARBRETOR (se) 1
4 80102-NX5-770 RUBBER,BOX SIDE 2
5 80108-NX5-770 FILTER,CARB BOX 1
7 90108-GK1-000 BOLT, FLANGE SH (6×12) 2
8 90652-ND5-000 TY-WRAP (2.4×92) 5
9 90654-NX5-770 STUD, FASTENER 35 1
10 90655-NX5-770 GROMMET, FASTENER 1
11 90656-NX5-770 SPRING,FASTENER 35 1
12 90754-NX5-770 STUD, FASTENER 30 (se) 1
13 90755-NX5-770 GROMMET, FASTENER 1
14 90756-NX5-770 SPRING, FASTENER 1
15 91082-NF5-000 RIVET, BLIND (2.4×5.7) 4
TYGA no: BPCX-0004
SKU: hon-10683 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsLower cowling (GRP) red, Honda MSX125SF GROM
€332.31
Lower Cowling, (GRP) red MSX125SF, Grom 2nd gen 16-17
Lower Cowling, (GRP), red, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428R
SKU: msx-10384 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopFuel Tank, GRP, HONDA RVF400 NC35
€1,226.36
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFG-0008
SKU: hon-11364 Categories: ALL products, Bodywork, Bodywork and carbon, RVF400RR NC35Silencer stainless round, WSS300 (race) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174p
SKU: ktm-10144 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSeat Cowling (With Carbon), NC35 T13, Assy.
€361.17
This is the seat cowling with carbon (front section and around top and bottom air ducts) and is used in the NC35 T13 style seat cowling kit BPFS-0118.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
Indicators BPLT-0020L and BPLT-0020R
registration/license plate holder BPCX-9118/BPFX-9118
TYGA no: BPCT-9218
SKU: hon-10809 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Fairingstay RC211V, NC35
€85.28
Lightweight GP style upper stay to use on the RC211V style and T13 fairings
TYGA no: TYLY-0020
SKU: hon-10155 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shop