Rubber Grommet type 2
€0.78
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: 5046-042-00
SKU: alg-10420 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KSR110 2005- 10, Mito 125, Monster, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CCarbon frame covers pair, Suzuki RGV250 VJ22
€361.23
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: BPCC-7419
SKU: suz-10115 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Suzuki, Suzuki RGV250Top end rebuild set Cylinder C, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘C’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston D mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001C
SKU: hon-10441 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopBrakereservoir cap, nissin
€58.86
This anodised CNC machined reservoir cap replaces the stock Nissin cap (Pt #45513-KV3-006, used on many models). We provide a range of colours as well as this colour.
Suitable for most Honda sports bikes that have a remote mounted reservoir for the front brake master and have a two bolt mounting arrangement. (Not suitable for threaded type caps.)
This product will fit:
NSR250 MC18, MC21, MC28
CBR400RR NC23, NC29
VFR400R NC30
CBR900RR SC28
VFR750 RC30
etc
May be suitable for other makes too.
TYGA no: TYLY-1049 - TYLY-4049
SKU: alg-10060 - alg-10064 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, NSR250 MC18, NSR250 MC21, NSR250 MC28, VFR400RR NC30Carbon engine cover right, ninja 400 2018 –
€144.93
Engine Cover, (Carbon), Right, Ninja 400, 2018-
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
See also: BPCC-7140L and BPCC-7014 (set with left and right cover)
TYGA no: BPCC-7140R
SKU: kaw-10129 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Sprocket holder CNC silver, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-1043
SKU: hon-10394 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopCarbon Seat set RVF, NC35
€912.34
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
This panel can also be ordered in kit BPFS-0066 complete carbon set NC35, street, and BPFS-0068 complete carbon set NC35, race.
TYGA no: BPCT-9004
SKU: hon-10139 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopTop triple clamp CNC black RACE, KTM RC390, 2014- 21
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1931
SKU: ktm-10219 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all models