Top Triple clamp CNC black kit , Honda NSR250 MC18/MC21/MC28
€218.46
Top Triple Clamp Set, CNC Black, NSR250
CNC machined TYGA top triple clamp with detachable ignition switch/lock holder for your NSR250.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1441Â
SKU: hon-10269 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopSilencer stainless round, WSS300 (race) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174p
SKU: ktm-10144 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsStud, A, MC28
€4.36
Stud, A, MC28
TYGA no: 90031-KV3-830
SKU: hon-11133 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Exhaustset race Stainless steel (high level) double Stainless steel Silencers, NC30 NC35
€1,276.81
This exhaust system includes everything you need to replace the stock system. It includes, stainless pipe work, twin carbon silencers, springs, gaskets, silencer clamp, mounting stay and all other mounting hardware.
This system can be used with stock Honda or Tyga bodywork/subframes
Dynograph shows totaly stock 35 compared to modded bike , twin stack tyga system, 1 layer race foam, short stacks, 125 mains front and rear, standard cdi.
TYGA no: EXPS-0158
SKU: hon-11323 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Lower cowling GP-T, Honda VFR400 NC30
€216.35
Lower Cowling (GRP), NC30 GP-T, Assy.
This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0144
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9034.
Compatible products:
This product must be used with BPFU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPFL-9034
SKU: hon-10599 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, VFR400RR NC30Stay, wiring harness, NC30/35
€6.55
Stay, wiring harness, NC30/35
This useful stay helps to support the wiring harnesses and cables where they thread along the front of the frame. Can be used with our various GP and RCV upper stays. It can really be used in any other similar application on other models too.
TYGA no: BPSY-0191
SKU: hon-10760 Categories: ALL products, By model, Honda, RVF400RR NC35, Universal parts, Various parts, Various parts, VFR400RR NC30Lower cowling (GRP), stock shape, NXA RS250R (2001- ’08)
€226.37
VHM cylinder head (2 pieces), Honda RS250 (alg-10174)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Water Hose C, MC28
€12.31
Water Hose C, MC28
TYGA no: 19513-KV3-770
SKU: hon-11161 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28