Section, Left #1, KTM RC390 Serpent
€45.13
Section, Left #1, KTM RC390 Serpent
TYGA no: EXPT-0054
SKU: ktm-10117 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSilencer aluminium Classic 60mm, 2 stroke black endcap
€76.12
Silencer, Aluminium Classic, Two Stroke, Assy.
This aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.
Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.
“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0002 Shorty Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
TYGA no: EXSL-0001b
SKU: alg-10091 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopSeat set race GP-T, Honda NSR250 MC18
€998.82
Kit, Seat Set, GRP (Race), MC18 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC18.
‘Note this kit has been designed primarily for the 1989 model but will also fit the 1988. Note that for the 1988 model, the exhaust stays are suitable for our TYGA exhaust system but not the stock exhausts. The wiring harness differs on the 1988 model so there may be some modification of the wiring harness required.’
The kit comprises parts shown below which are also available separately.
Note there are 3 MC18 GP-T seat cowling kits to choose from:
BPFS-0160 Street GRP
BPFS-0161 Race GRP
BPFS-0162 Street Carbon
TYGA no: BPFS-0161
SKU: hon-10629 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopTYGA / Kitaco Power up kit stainless , Honda MSX125 GROM
€741.04 €666.94
TYGA/KITACO Power Up Kit, Stainless Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0096
SKU: MSX-10304 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon bracket seat, RGV250 VJ23
€73.55
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Exhaustset race Stainless steel, Motogp silencer, Honda CBR250R
€393.26
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-3013. If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing approx 2.5 kg instead of the stock systems 8kg.
This system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!
TYGA no: EXPS-0029
SKU: hon-10305 Categories: 4 stroke exhaust sets, ALL products, CBR250R 2011 - 15, Exhausts, Exhausts, Honda, ShopRear sprocket aluminium gold, Honda CBR500
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0111-40T - TYSR-0111-43T
SKU: hon-10331 - hon-10334 Categories: ALL products, By product, CBR500R, Honda, SprocketsKit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21
€681.48
Kit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21
Complete set of stock shaped bodywork for the Suzuki RGV250 VJ21
Consists of the following products ( also available seperatly)
BPFU-0019 Upper Fairing
BPFL-0019 Lower Fairing
BPFT-1019 Seat Cowling
BPFF-0019 Front Fender
SCRE-0120 Clear Screen
TYGA no: BPFS-0191
SKU: suz-10120 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250